Chapter 3. Operation
PORT CONFIG
Operation
3-6
The 7)PORT CONFIG submenu is used for configuration
of the Dual Nx56/64 V.35 option module.
To display Figure 3-4 on the TSU 100, place the cursor on
main menu item 2)CONFIG, and do the following:
1.
Press
or the number
Enter
first two Configuration submenu items with the cur-
sor on 1)NETWORK (NI).
2.
Use the down arrow key to place the cursor on
7)PORT CONFIG, and press
3.
Use the up and down arrow keys to identify 1.1
D
N
56/64 V.35 option module. Only the bottom
UAL
X
line of the display changes.
Figure 3-4. Port Configuration Submenu
To select P
C
ORT
ONFIGURATION
the first of eight submenu items. They are:
Interface
This selects the active interface for the Nx port. The Nx
ports, which are installed as option modules, have only
one type of interface.
Choice: V.35
Dual Nx56/64 Option Module User Manual
key. This displays the
2
.
Enter
, press
. This displays
Enter
61200142L1-1