Winglet - FUTABA T16IZ Manual

Winglet

This function adjusts the left and right rudder
angles of airplanes with winglets.
It can be used for special airplanes with two
rudders. The amount of movement of the two
mounted rudder servos can be adjusted separately.
Two servos are operated with one rudder stick.
● Select [Winglet] at the model menu and
call the setup screen shown below.
●Return to Model menu
Condition group/
single mode
selection (Gr. /Sngl)
[Corresponding model type]: Airplane/glider, winglet(2RUD)
● Travel adjustment
Tap to the item you want to adjust.
Adjust the rate using the "▼▼" "▼" "▲" "▲▲"
buttons.
*If the mixing direction is reversed by the linkage,
adjustments can be made by changing the mixing rate
polarity (+ or -).
152
RUDDER 1
( )
Winglet
at Flying wing
(Rudder 1/2)
The travel at rudder stick left and right
operation can be individually set.
→ GO to TABLE OF CONTENTS
RUDDER 2
( )
Winglet
at Flying wing