Before Using - Heinner HBL-500R Instruction Manual

www.heinner.com
V.

BEFORE USING

Before initial use
1. Before first use, unpack the appliance and place all parts on a horizontal surface.
2. The jar assembly (including the measure cup, lid, seal ring 1, jar, seal ring 2 , blade
assembly and jar base) has already been assembled into the motor unit. Disassemble to
wash all detachable parts except the motor unit. Refer to the latter chapter CARE AND
CLEANING.
3. Once all pieces have been cleaned and dry thoroughly, reassemble.
1) Invert the jar onto a level surface, holding the jar handle, put the the seal ring 2 and
blade assembly onto the jar base bottom and secure the blade assembly by turning it
anti-clockwise until tight（See Fig.3）
2) Reposition the jar assembly with its opening upwards. Wrap the seal ring 1 around
the lid bottom and put the lid onto the jar assembly. Place the measure cup exactly into
the lid by fitting the small projection on the both sides of the cup into the slots of the lid
and turning the cup clockwise until tight. （See Fig.4）
3) Finally, place the assembled jar onto the motor unit by aligning the strip on the
assembled jar bottom. (See Fig.5）
4) Disconnect from power supply once finished. Disassemble the grinding attachment
from the unit, keep the grinding bowl downward and turn it anticlockwise (See Fig.6),
then empty the bowl and serve.
CAUSION: Jar and jar base is now secure. Do not try to twist the jar and jar base onto
motor unit
.
Fig.3
Fig.6
500W, 50Hz-60Hz, 220-240V
Fig.4 Fig.5
4