Table of Contents
Advertisement
3
"ST25DV-I2C Crypto Demo" application screens
3.1
Home screen
User manually launches the application "ST25DV-I2C-Crypto Demo" or simply taps the ST25DV-I2C NFC tag,
Android™ automatically launches the "ST25DV-I2C-Crypto Demo" application.
When the application starts, it initializes the Android™ KeyStore and some cryptography elements.
By default, the "User authentication" is disabled but this can be changed in the "Settings" menu. If enabled, the
user has to enter its pin-code or fingerprint every time this application starts.
On iOS™ application, user must launch the application manually since NFC is only enabled on demand by user
application.
When the iOS™ application starts, a home screen is displayed and a tab bar appears at the bottom of the
application screen (see
application.
Push on section "Crypto Demo" to start demonstration.
UM2684 - Rev 2
Figure 6.
"ST25DV-I2C Crypto Demo" - Android™ home screen
Figure
7). It provides the ability to quickly switch between different sections of an
"ST25DV-I2C Crypto Demo" application screens
UM2684
page 9/27
Advertisement
Table of Contents
Need help?
Do you have a question about the ST25DV-I2C and is the answer not in the manual?
Questions and answers