Installation - emmeti 01514228 Manual

GB

Installation

230 V Power supply model
partially recessed in box 503
• Open the lower compartment (Fig. 1 - p. 4).
• Remove the fastening plate from the thermostat by loosening the screws found
in the lower compartment and fasten the plate on box 503 (Fig. 2 - p 4).
• Connect the thermostat power supply clamps k to the mains (Fig. 5 - p. 9).
A
• Make he remaining electrical connections (Fig. 5 - p. 9).
• Hook the chronothermostat to the fastening plate (Fig. 3 - p. 5).
• Tighten the screws in the lower compartment again.
42