Instant Help - KERN YKG-01 Operating Instructions Manual

8 Instant help

Symptom
No lamps
illuminated on the
control panel
ERROR LED
flashes or lights up
Paper jam
18
Remedy
Check cable connections and mains connection
 The print head temperature may potentially be too
high or too low. Wait until the print head reaches a
normal temperature and the printer automatically
resumes operation.
 Make sure the paper roll cover is firmly closed.
 A paper jam has occurred. To remove the paper jam,
refer to the instructions below.

If there is a problem, turn off the printer, wait a few
seconds, and turn it back on. Contact your dealer if
the error persists.
CAUTION: The print head gets very hot during printing.
Allow it to cool down before reaching into the printer.
 Open the paper roll cover using the tab as shown in
Figure H and clear the paper jam.
 Reinsert the paper roll and close the paper roll cover.
YKG-01-BA-e-1910