KERN YKS-01 Operating Instructions Manual
Statistics printer
Hide thumbs
Also See for YKS-01:
- Operating instructions manual (39 pages) ,
- Configuration manual (41 pages) ,
- Operating instructions manual (11 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for KERN YKS-01
Summary of Contents for KERN YKS-01
- Page 1 KERN & Sohn GmbH Ziegelei 1 Phone: +49-[0]7433- 9933-0 D-72336 Balingen Fax: +49-[0]7433-9933-149 email: info@kern-sohn.com Internet: www.kern-sohn.com Operating instructions Statistics printer KERN YKS-01 Version 1.0 05/2010 YKS-01-BA-e-1010...
-
Page 2: Table Of Contents
KERN YKS-01 Version 1.0 05/2010 Operating Manual Statistics printer Table of Contents Technical Data......................3 Unpacking........................4 Installation and commissioning................4 Printer parts......................4 Preparing your printer for operation ..............5 Operating elements....................7 Start-up ........................7 Statistics function ....................8 Arithmetic mean value of the basic totality: ..................9 Standard deviation of the basic totality ................... -
Page 3: Technical Data
Printer YKS-01 is a standard thermal printer 1 Technical Data Bi-directional thermal print with moveable 8 dot matrix head Printout Character 8x8 dot matrix composition 0.75 lines Print speed Number of 40, 80 characters per line IBM set 2 Character set... -
Page 4: Unpacking
Power is supplied via the external mains adapter. The stated voltage value must be the same as the local voltage. Only use original KERN mains adapters. Using other makes requires consent by KERN. 4 Printer parts 1 – ON/OFF switch 2 –... -
Page 5: Preparing Your Printer For Operation
There are two interfaces at the back wall of the housing: Terminal printer cable Terminal power supply unit Always use KERN accessories and weighing balances when working with your printer. Disconnect the printer from the mains voltage before connecting the cable to the printer. - Page 6 ⇒ Press and hold the FEED key until the paper emerges from the outlet slot of the mechanism Tearing off paper ⇒ Pull the printout across the direction of printout that it rests on the cutter bar of the printer housing Do not pull printout upwards. YKS-01-BA-e-1010...
-
Page 7: Operating Elements
Red LED is lit up, printer is ready for operation. ⇒ Press “FEED” key: Switch numerator on or off, when statistics function is „ON“ ⇒ Press and hold “FEED” button: Paper transport. ⇒ Press “FEED” button: Switch date and time on or off, when statistics function is „ON“ YKS-01-BA-e-1010... -
Page 8: Statistics Function
Mean value of all test results σ Standard deviation of the basic totality σ Standard deviation of a random sample Minimum value of the basic totality Maximum value of the basic totality Span of the basic totality (maximum value – minimum value) YKS-01-BA-e-1010... -
Page 9: Arithmetic Mean Value Of The Basic Totality
8.1 Arithmetic mean value of the basic totality: 8.2 Standard deviation of the basic totality 8.3 Standard deviation of a random sample YKS-01-BA-e-1010... -
Page 10: Glp Log
Adjustment (GLP) Date: 18/05/10 Hour: 14:26 Balance Manufacturer: ___________________ _________________________________________ Model: ___________________ _________________________________________ Serial no.: ___________________ _________________________________________ ___________________ _________________________________________ Adjustment weight external internal Serial no..: ___________________ Rated value: ___________________ Class: ___________________ _________________________________________ Adjustment successful: _________________________________________ Auditor: ___________________ Signature: ___________________ YKS-01-BA-e-1010... -
Page 11: Storage Conditions And Use Of Thermal Paper
Always store printed paper under the following conditions: - Do not expose to direct sunlight or intensive room lights - Avoid contact with alcohol, solvents or similar substances (e. g. adhesives), - Do not store inside PVC pockets - Storage temperature < 25ºC. 11 Printer cable YKS-01-BA-e-1010... -
Page 12: Instant Help
Check whether SW switches are set correctly. printed Printout is blurred Check whether operating temperature exceeds allowed value, whether the paper used is recommended by the manufacturer. If you are unable to remedy the error, please contact your supplier. YKS-01-BA-e-1010...
Need help?
Do you have a question about the YKS-01 and is the answer not in the manual?
Questions and answers