KERN YKG-01 Operating Instructions Manual page 10

3. Insert the ink ribbon cartridge in the position shown in Figure F and
push it down until it clicks into place.
Note:
4. Make sure that the ink ribbon is smooth and free of creases
between the print head and the pressure plate.
5. Turn the ink ribbon cartridge knob another two or three times in the
direction of the arrow and close the ink ribbon cartridge cover.
Make sure that you do not accidentally touch the print head with your
fingers when turning the ink ribbon cartridge knob, otherwise burn
CAUTION
injuries cannot be ruled out.
When replacing the ink ribbon cartridge, first lift the left side of the ink
ribbon cartridge, than lift the entire ink ribbon cartridge.
10 YKG-01-BA-e-1910