KERN YKB-01N Operating Instructions Manual
Hide thumbs
Also See for YKB-01N:
- Configuration manual (41 pages) ,
- Operating instructions manual (33 pages) ,
- User manual (11 pages)
Table of Contents
Related Manuals for KERN YKB-01N
Summary of Contents for KERN YKB-01N
- Page 1 KERN & Sohn GmbH Ziegelei 1 Phone: +49-[0]7433- 9933-0 D-72336 Balingen Fax: +49-[0]7433-9933-149 email: info@kern-sohn.com Internet: www.kern-sohn.com Operating instructions Thermal Printer KERN YKB-01N Version 2.1 09/2009 YKB-01N-e-0921...
- Page 2 KERN YKB-01N Version 2.1 09/2009 Operating Manual Thermal printer Printer YKB-01 is a standard thermal printer 1. Technical Data Printout Bi-directional thermal print with moveable 8 dot matrix head Character 8x8 dot matrix composition Print speed 0.75 lines Number of...
- Page 3 Power is supplied via the external mains adapter. The stated voltage value must be the same as the local voltage. Only use original KERN mains adapters. Using other makes requires consent by KERN. Printer parts 1 – ON/OFF switch 2 – Cover of paper compartment 3 –...
- Page 4 There are two interfaces at the back wall of the housing: Terminal printer cable Terminal power supply unit Always use KERN accessories and weighing balances when working with your printer. Disconnect the printer from the mains voltage before connecting the cable to the printer.
- Page 5 Preparing the paper: ⇒ Fold over one end of the paper before inserting it into the printer Inserting the paper ⇒ Insert the folded-over end of the paper into the mechanism ⇒ Turning on the printer supply ⇒ Press and hold the FEED key until the paper emerges from the outlet slot of the mechanism Tearing off paper...
- Page 6 Always store printed paper under the following conditions: - Do not expose to direct sunlight or intensive room lights - Avoid contact with alcohol, solvents or similar substances (e. g. adhesives), - Do not store inside PVC pockets - Storage temperature < 25ºC. 9. Printer cable YKB-01N-e-0921...
- Page 7 10. Instant help Symptom Remedy The supply indicator is not Check whether the power supply unit is connected to the printer and to lit up. the mains. Paper does not emerge. Check whether the paper has been inserted correctly, whether the input slot of the mechanism is free of obstructions Paper leaves printer Check whether the paper has been inserted with its thermo-sensitive without print:...
Need help?
Do you have a question about the YKB-01N and is the answer not in the manual?
Questions and answers