involight LEDSTROB18 User Manual page 2

Our DMX LED istrobe offers many possibilities to achieve the effects which you want. It is for DJs, bands, nightclubs and other
performers who want a complete LED wash light system. Please read the manual before operation.
Power Input: 100V AC~240V AC,50Hz/60；
LEDs: 1W*18, cool white
Consumption: 25W
DMX Channel: 3CHs
Four working modes:
 Sound active mode
 M/S mode
 DMX mode
 Dimming mode
Ⅰ，Sound active mode
1，Press MODE button to enter into sound active mode "SE.x".
2，Press UP or DOWN button to adjust the sensitivity of sound control "SE.0～SE.9".
3，Potentionmeter could be used to adjust the sound active sensitivity ,clockwise
rotation could wake the hight sensitivity ,and contrarotate to low sensitivity.
Ⅱ,M/S mode
1， Press MODE button to enter into M/S mode "SLA".
Ⅲ,DMX 模式 DMX mode
1，Press MODE button to enter into DMX mode "d--.".
2，Press SETUP
3，Press UP or DOWN button to set DMX address "001.～512.".
CH1
DMX LED lstrobe,18*1W
button to enter into DMX address setting condition"xxx.".
DMX mode control table
CH2
MY-038
CH3 FUNCTION