Palazzetti Inserimento A70 Installation, User And Maintenance Manual page 35

14. Reposition the machine on the sliding guides
(Fig. 6.1.8) and reassemble the locking bolts
previously removed in step 5.
15. Reassemble the cardholder assembly (A) (Fig.
6.1.4A).
16. Re-connect the display cable connector, with its
relative mass, to the board and the power cable.
17. Replace the right side strip that had previously
been removed (Fig. 6.1.4).
18. Push the machine to the end of the sliding
guides. (Fig. 6.2.0) watching out for any
interference caused by the cables. Then group
these cables together through the application
of a tie.
19. Open the door, insert the Allen key (A) into
position in the lock release mechanism and
rotate the closing lever clockwise to position (B)
to lock the guides (Fig. 6.2.1)
20. Close the door (Fig. 6.2.2)
INSTALLATION
A
00 4776070 - 17/12/2018 - PN - Italy
2
1
B
1
2
Fig. 6.2.2
Fig. 6.1.8
Fig. 6.2.0
Fig. 6.2.1
35