Toyota Land Cruiser Prado 2012 Manual page 78

1-2. Opening, closing and locking the doors
 Setting and canceling the functions
To switch between setting and canceling, follow the procedure
below.
Close all the doors and turn the "ENGINE START STOP"
STEP 1
switch to IGNITION ON mode. (Perform step 2 within 20 sec-
onds.)
STEP 2
78
L/C150_OM_OM60J78E_(EE)
Shift the shift lever to P or N, and
press and hold the driver's door
lock switch ( or
approximately 5 seconds and
then release.
The shift lever and switch posi-
tions corresponding
desired function to be set are
shown in the following table.
Use the same procedure to can-
cel the function.
) for
to the