Toyota Land Cruiser Prado 2012 Manual page 330

Table of Contents

Advertisement

2-4. Using other driving systems
Adjusting the set speed
To change the set speed, operate the lever until the desired set
speed is displayed.
In the vehicle-to-vehicle distance control mode, the set speed
will be increased or decreased as follows:
• When the set speed is shown in "MPH"
Fine adjustment: By approximately 8 km/h (5 mph) each time
the lever is operated
Large adjustment: By approximately 8 km/h (5 mph) for each
0.75 seconds the lever is held
• When the set speed is shown in "km/h"
Fine adjustment: By approximately 5 km/h (3.1 mph) each
time the lever is operated
Large adjustment: By approximately 5 km/h (3.1 mph) for
each 0.75 seconds the lever is held
In the constant speed control mode (P. 335), the set speed will
be increased or decreased as follows:
Fine adjustment: By approximately 1.6 km/h (1 mph) each time
the lever is operated
Large adjustment: The set speed can be increased or
decreased continually until the lever is released.
330
L/C150_OM_OM60J78E_(EE)
Increases the speed
Decreases the speed
Fine adjustment: Momentarily
move the lever in the desired
direction.
Large adjustment: Hold the
lever in the desired direction.

Advertisement

Table of Contents
loading

Table of Contents