Toyota Land Cruiser Prado 2012 Manual page 630

4-3. Do-it-yourself maintenance
 Engine oil consumption
The amount of engine oil consumed depends on the oil viscosity, the

quality of the oil and the way the vehicle is driven.
 More oil is consumed under driving conditions such as high speeds and
frequent acceleration and deceleration.
 A new engine consumes more oil.
When judging the amount of oil consumption, keep in mind that the oil

may have become diluted, making it difficult to judge the true level accu-
rately.
 Oil consumption: Max. 1.0 L per 1000 km (1.1 qt./600 miles, 0.9 Imp.qt./
600 miles)
 If you consume more than 1.0 L (1.1 qt., 0.9 lmp.qt.) every 1000 km (600
miles), contact any authorized Toyota dealer or repairer, or another duly
qualified and equipped professional.
 After changing the engine oil (diesel engine only)
The oil maintenance data should be reset. Perform the following procedures:
STEP 1 Switch the display to the trip meter "A" when the engine is running.
(P. 268)
STEP 2 Turn the "ENGINE START STOP" switch OFF.
While pressing the "ODO TRIP" button (P. 268), set the "ENGINE
STEP 3
START STOP" switch to IGNITION ON mode (but do not start the
engine because otherwise the reset mode will be cancelled). Con-
tinue to press and hold the button until the multi-information display
indicates that the reset is complete.
630
L/C150_OM_OM60J78E_(EE)