Table of Contents
Advertisement
The meters and display illuminate when
Vehicles without a smart entry & start system
The engine switch is in the "ON" position.
Vehicles with a smart entry & start system
The "ENGINE START STOP" switch is in IGNITION ON mode.
The brightness of the instrument cluster lights
Vehicles with a non-optitron type meter
When the headlight switch is turned to on, the brightness will be reduced
slightly.
Vehicles with an optitron type meter
When the headlight switch is turned to on, the brightness will be reduced
slightly unless the control dial is turned fully clockwise.
When disconnecting and reconnecting battery terminals
The trip meter data will be reset.
If the trip meter was displayed last, the ODO screen will be displayed after
resetting.
NOTICE
To prevent damage to the engine and its components
Do not let the indicator needle of the tachometer enter the red zone, which
indicates the maximum engine speed.
The engine may be overheating if the engine coolant temperature gauge is
in the red zone (H). In this case, immediately stop the vehicle in a safe
place, and check the engine after it has cooled completely. (P. 803)
L/C150_OM_OM60J78E_(EE)
2-2. Instrument cluster
2
269
Advertisement
Table of Contents
