Toyota Land Cruiser Prado 2012 Manual page 116

1-3. Adjustable components (seats, mirrors, steering wheel)
STEP 4
 Recalling the memorized position
Vehicles with an automatic transmission
STEP 1
Check that the shift lever is in P.
Vehicles with a manual transmission
Check that the parking brake is set.
Vehicles without a smart entry & start system
STEP 2
Turn the engine switch to the "ON" position.
Vehicles with a smart entry & start system
Turn the "ENGINE START STOP" switch to IGNITION ON
mode.
STEP 3
116
L/C150_OM_OM60J78E_(EE)
While pressing the "SET" but-
ton, or within 3 seconds after
the "SET" button is pressed,
press button 1 or 2 until the
signal beeps.
If the selected button has
already been preset, the previ-
ously recorded position will be
overwritten.
Press button 1 or 2 to recall
the desired position.