Table of Contents
Advertisement
INSTALLATION
The SLA-2 may be used in a wide variety of project and professional
studio environments. Self-contained in a steel and aluminum
enclosure, the unit is designed for many years of use. For greater
reliability, we recommend that you not place the unit directly under or
on top of other sources of heat. It is important that any rack-mountable
unit is properly ventilated, and the SLA-2 is no exception.
AC POWER HOOKUP
The SLA-2 has an internal power supply designed to operate at 120
VAC @ 50 to 60 Hz. Units manufactured for use outside of North
America have been modified to comply with the required electrical
specifications.
AUDIO CONNECTIONS
Audio connections to and from the SLA-2 are balanced XLR [Pin 2 =
Hot (+), Pin 3 = Cold (-), Pin 1 = (Ground)] and balanced or
unbalanced ¼" [Tip = Hot (+), Ring = Cold (-), Sleeve = (Ground)].
EuroBlock connections: can be wired balance or unbalanced.
See diagram on page 10
5
Hide quick links:
Advertisement
Table of Contents
