Advertisement
Shutdown Procedure
Remove all racks, cover all baths, close the fume shield.
The Stainer can be left ON when not in use or it can be powered down.
To power down, press the On/Off switch on the rear of the stainer to OFF.
For extended shutdown or if the stainer is to be taken out of service, remove any items that may be
on board and close the fume shield. Press the On/Off switch on the rear of the stainer to OFF.
Completely remove power to the stainer by unplugging the power cord from the power source.
System overview
Major functional areas of the Compass Stainer are shown in the following figures.
Fume Shield
Transport Arm
Mechanism
Slide Rack
Reagent Container
page 14
Figure 8-2 Compass Stainer - Front View
™
Compass
Stainer Operator's Manual
Fume Shield
Display
Keypad
Advertisement
