Keypad Lock Password; System Operation Hours - emmeti CTUP User Manual

Keypad lock password

It is possible to choose a three digits value to be used to unlock the keypad.
Field (22) will display the writing "PAS="
and on field (16) the password value
currently set will flash (the default set
value is "123"). Using the "
" " keys, choose a desired value and
press " " to confirm.
To enable/disable the keypad lock,
please refer to the chapter "ADVANCED
FUNCTIONS".

System operation hours

It is possible to display the system operation hours (relay in ON status).
Note: the count relates only to the relay of the programmable thermostat (the
operation of the humidistat is not counted).
Field (15) displays the writing "tot="
while fields (22) and (16) will display
the timing value (such value is of 5 digits,
3 on field (22) and 2 on field (16) and
it is to be read from left to right. In the
example the value is of 1274 hours).
Two independent totalizers for winter
and summer operation are present. The
maximum memorizable value is of 65535
hours. To reset the counter, press the
" " key for about 3 seconds when you
are in the counter view menu.
" and
- 52 -
Chronothermostat with Humidistat User Manual