Humidistat Operation; Humidistat Setpoint Programming; Humidistat Differential Setting - emmeti CTUP User Manual

Field (22) displays the writing "dEG="
and on field (25) the measurement unit
currently set will flash.
Press the " " or "
to change the unit and " " to confirm.

Humidistat operation

It is possible to set the intervention
differential about the humidistat relay.
Choose dEU if you want to command a
dehumidifier or U if you want to command
a humidifier. Choose 0FF to exclude
regulation (relay always open).
Note: during normal operation the relay position is indicated by the decimal point
in the field (15). In particular, if the point is on the relay is closed (connected load),
while the relay will be opened (disconnected load).

Humidistat setpoint programming

Set the desired humidity value. You can
choose a value between 30% and 90% RH.

Humidistat differential setting

Set the intervention differential for
humidity regulation. You can choose a
value between 5% and 20% RH.
Note: the differential is unidirectional. The
operating logic is described in the diagram
on page 56.
" keys indifferently
- 51 -
Chronothermostat with Humidistat User Manual