Technical Data - ATH-Heinl Single Lift 35M Operating Instructions Manual

1.4

Technical Data

Model
Load capacity
Lifting time (2,000 kg)
Lowering time (2,000 kg)
Electrical system
Lifting height
Control voltage
Motor
Upstream fuse
Connection cable
Protection type
Working pressure ²
Recommended hydraulic oil
Oil quantity
Permissible sound level
Weight
The factory-set working pressure is adjusted to the maximum power rating. The pressure relief
valve must not be manipulated. Changing the settings can lead to serious damage.
If the indicated rated load cannot be lifted, please contact our
service team.
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2020-03
ATH Single Lift 35M
3,500 kg
1/230V/50 Hz or 3/400V/50 Hz
100-1850 mm
2.2 KW or 2.6 KW
1 C 16 A / 3 C 16 A
Min. 3 x 1.5 mm² or 5 x 2.5 mm²
Approx. 120 bar
Summer: HVLP-D 46 (e.g.: ENI Precis HVLP-D 46)
Winter: HVLP-D 32
Approx. 6 l
1,300 kg
Manufacturer ATH-Heinl GmbH & CO.KG
- 8 -
40 s
45 s
DC24V
IP 43
≤ 76 dB