3.0 GENERAL INFORMATION
The PRO/pak Portable Foam System is a very versatile eductor-type foam application appliance. It can be used with 0.1%-1% Class A
foam concentrates for wildland, rural and urban fire suppression on Class A fuels (wood, paper, combustible materials). On Class A
materials the PRO/pak is intended to be used for direct extinguishment, overhaul, and wetting of fuels. Some foam concentrates are
corrosive, we recommend using only Class A concentrates that have received USDA and USFS approval.
On Class B materials the PRO/pak is primarily intended to be used for vapor suppression. It can be used with 1% and 3% AFFF
B
concentrates on flammable liquids that do not contain alcohol. It can be used with 3% and 6% Alcohol Resistant AFFF Class B
concentrates on flammable liquids containing polar solvents. It can also be used with 3% X 6% or 6% Class B foam concentrates.
When ever possible back up the PRO/pak with additional water/foam capabilities for added safety.
The The Pro/pak can be used on ignited liquid fuels, but it's foam application rate is very limited. Based on NFPA 11 this unit should not
be used on ignited Class B fuels with an area greater than 120 square feet (10 x 12 feet) or 11 square meters. The PRO/pak should not
be used on burning Polar Solvents with an area greater than 60 square feet (6 x 10 feet) or 5.5 square meters.
The PRO/pak is designed for Class A and Class B foam concentrates, but it has been used with other concentrates for other uses.
If you intend to use the PRO/pak for liquids other than Class A and Class B concentrates and water, we urge you to contact the Task
Force Tips Engineering Department. The use of other liquids may void the warranty and subject the user to hazzards not addressed in
PRO/pak FLOW CHARACTERISTICS (with valve fully open)
500
MAXIMUM OPERATING
450
PRESSURE = 500 PSI
400
350
MINIMUM OPERATING
300
PRESSURE = 40 PSI
250
200
150
100
50
0
0
2
4
PRO/pak FLOW CHARACTERISTICS (with valve fully open)
30
28
MAXIMUM OPERATING PRESSURE = 40 BAR
26
24
22
MINIMUM OPERATING PRESSURE = 3 BAR
20
18
16
14
12
10
8
6
4
2
0
0
10
20
6
8
10
12
14
16
18
20
FLOW (GPM)
40
30
50
60
FLOW (L/MIN)
22
24 26
28
70
80
90
100
MINUTES TO USE 2½ GALLONS
OF CONCENTRATE AT 12 GPM
PERCENT
MINUTES
0.1
208
0.2
104
0.3
69
0.4
52
0.5
42
1
21
3
7
6
3.5
MINUTES TO USE 10 LITERS
OF CONCENTRATE AT 45 l/min
PERCENT
MINUTES
0.1
208
0.2
104
0.3
69
0.4
52
0.5
42
1
21
3
7
6
3,5
Class
3
Need help?
Do you have a question about the PRO/pak and is the answer not in the manual?
Questions and answers