Task Force Tips MASTERSTREAM Series Instructions For Installation, Safe Operation And Maintenance
With flush nozzle
Hide thumbs
Also See for MASTERSTREAM Series:
Table of Contents
Advertisement
Quick Links
INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE
WARNING
This instruction manual is intended to familiarize fi refi ghters and maintenance personnel with the operation, servicing and
safety procedures associated with the Masterstream Series fi refi ghting nozzles.
This manual should be kept available to all operating and maintenance personnel.
Masterstream 1250 Selectable Flow with Flush
500-750-1000-1250 GPM @ 100 PSI
2000-3000-3800-4800 l/min @ 7 BAR
Masterstream 1000 Selectable Flow with Flush
350-500-750-1000 GPM @ 100 PSI
1300-2000-3000-3800 l/min @ 7 BAR
Masterstream 1250 Fixed Flow with Flush
1250 GPM @ 100 PSI K = 125
4800 l/min @ 7 BAR
Masterstream 1000 Fixed Flow with Flush
1000 GPM @ 100 PSI – K=100
3800 l/min @ 7 BAR
Masterstream 1250 Automatic Pressure with Flush
300-1250 GPM @ 80-120 PSI
1100-4800 l/min @ 5.5-8.3 BAR
Masterstream 1000 Automatic Pressure with Flush
300-1000 GPM @ 80-120 PSI
1100-3800 l/min @ 5.5-8.3 BAR
TASK FORCE TIPS, INC.
MADE IN USA • www.tft.com
©Copyright Task Force Tips, Inc. 2015
MANUAL:
MASTERSTREAM with Flush Nozzle Series
Understand manual before use. Operation of this device without understanding the manual
and receiving proper training is a misuse of this equipment. Obtain safety information at
www.tft.com/serial-number
3701 Innovation Way, Valparaiso, IN 46383-9327 USA
800-348-2686 • 219-462-6161 • Fax 219-464-7155
LIM-045 September 15, 2015 Rev00
Advertisement
Table of Contents
Related Manuals for Task Force Tips MASTERSTREAM Series
Summary of Contents for Task Force Tips MASTERSTREAM Series
- Page 1 This instruction manual is intended to familiarize fi refi ghters and maintenance personnel with the operation, servicing and safety procedures associated with the Masterstream Series fi refi ghting nozzles. This manual should be kept available to all operating and maintenance personnel.
-
Page 2: Table Of Contents
6. Failure to follow these guidelines may result in death, burns or other severe injury. Fire and Emergency Manufacturers and Service Association FEMSA P.O. Box 147, Lynnfi eld, MA 01940 • www.FEMSA.org ©Copyright Task Force Tips, Inc. 2015 LIM-045 September 15, 2015 Rev00... -
Page 3: Meaning Of Safety Signal Words
1 Electrostatic Hazards of Foam Blanketing Operations by Peter Howels. Industrial Fire Safety July/August 1993 2 The Fire Fighter and Electrical Equipment, The University of Michigan Extension Service, Fourth Printing 1983. Page 47. ©Copyright Task Force Tips, Inc. 2015 LIM-045 September 15, 2015 Rev00... -
Page 4: General Information
Use with saltwater is permissible provided nozzle is thoroughly cleaned with fresh water after each use. The service life of the nozzle may be shortened due to the effects of corrosion and is not covered under warranty. ©Copyright Task Force Tips, Inc. 2015 LIM-045 September 15, 2015 Rev00... -
Page 5: Flow Characteristics
120 PSI SETTING 110 PSI SETTING 100 PSI SETTING 90 PSI SETTING 80 PSI SETTING 1000 1200 1400 1600 FLOW (GPM) Figure 4.1B MASTERSTREAM 1000 AUTOMATIC WITH FLUSH PERFORMANCE ©Copyright Task Force Tips, Inc. 2015 LIM-045 September 15, 2015 Rev00... -
Page 6: Selectable Flow
4000 5000 6000 1000 GPM 350 GPM 500 GPM 750 GPM SETTING SETTING SETTING SETTING 1000 1200 1400 1600 FLOW (GPM) FIG 4.2B MASTERSTREAM 1000 SELECTABLE WITH FLUSH PERFORMANCE ©Copyright Task Force Tips, Inc. 2015 LIM-045 September 15, 2015 Rev00... -
Page 7: Fixed Flow
WARNING resulting in an ineffective fl ow. In the event of a blockage, it may be necessary to retreat to a safe area, uncouple the nozzle and remove debris. ©Copyright Task Force Tips, Inc. 2015 LIM-045 September 15, 2015 Rev00... -
Page 8: Reach And Trajectory
3000 1000 3800 1250 4800 METERS MASTERSTREAM 1250, 120 PSI (8.3 BAR, 830 KPA) HORIZONTAL DISTANCE (FEET) CURVE FLOW REACTION CURVE FLOW REACTION 2000 3000 3800 1000 4800 1250 ©Copyright Task Force Tips, Inc. 2015 LIM-045 September 15, 2015 Rev00... -
Page 9: Operation
PSI (or BAR) auto auto in-line auto Mount a graph or table of the results adjacent to the in-line pressure gauge. Deliver any desired fl ow by adjustment of pump pressure. ©Copyright Task Force Tips, Inc. 2015 LIM-045 September 15, 2015 Rev00... -
Page 10: Use With Foam
There are a wide variety of foam concentrates. Each user is responsible for verifying that any WARNING foam concentrate chosen to be used with this unit has been tested to assure that the foam obtained is suitable for the purpose intended. ©Copyright Task Force Tips, Inc. 2015 LIM-045 September 15, 2015 Rev00... -
Page 11: Drawings And Part List
7.0 DRAWINGS AND PART LISTS 7.1 MANUAL DRAWING AND PART LIST 15 14 13 12 14 13 35 34 28 27 ©Copyright Task Force Tips, Inc. 2015 LIM-045 September 15, 2015 Rev00... - Page 12 M500 46 3/16" SS BALL V2120 47 COUPLING 2.5"NHF RL M307* 48 1/4-28 X 1/2 SOCKET SET SCREW VT25-28SS500 49 GASKET 2.5" V3190 * Consult Factory for special threads ©Copyright Task Force Tips, Inc. 2015 LIM-045 September 15, 2015 Rev00...
-
Page 13: Warranty
8.0 WARRANTY Task Force Tips, Inc., 3701 Innovation Way, Valparaiso, Indiana 46383-9327 USA (“TFT”) warrants to the original purchaser of its nozzles and other equipment (“equipment”), and to anyone to whom it is transferred, that the equipment shall be free from defects in material and workmanship during the fi... -
Page 14: Maintenance
NFPA 1962: Standard for the care, use, inspection, service testing, and replacement of fi re hose, couplings, nozzles and fi re hose appliances. (2013 ed., Section 5.3). Quincy, MA: National Fire Protection Agency. ©Copyright Task Force Tips, Inc. 2015 LIM-045 September 15, 2015 Rev00... -
Page 15: Records
Any returns should include a note as to the nature of the problem and whom to reach in case of questions. Repair parts and service procedures are available for those wishing to perform their own repairs. Task Force Tips assumes no liability for damage to equipment or injury to personnel that is a result of user service. -
Page 16: Inspection Checklist
Operating a nozzle that fails any of the above inspections is a misuse of this equipment. TASK FORCE TIPS, INC. 3701 Innovation Way, Valparaiso, IN 46383-9327 USA 800-348-2686 • 219-462-6161 • Fax 219-464-7155 MADE IN USA • www.tft.com ©Copyright Task Force Tips, Inc. 2015 LIM-045 September 15, 2015 Rev00...
Need help?
Do you have a question about the MASTERSTREAM Series and is the answer not in the manual?
Questions and answers