General Information; Various Models And Terms - Task Force Tips MASTER FOAM Series Instructions For Safe Operation And Maintenance
Fixed gpm self-educting foam nozzle
Hide thumbs
Also See for MASTER FOAM Series:
Table of Contents
Advertisement
3.0 GENERAL INFORMATION
TFT MASTER FOAM nozzles are rugged self-educting foam fi xed orifi ce fog nozzles made from heat treated, hard anodized
aluminum.
MASTER FOAM nozzles come in three ranges. Each range determine water fl ow with baffl e options. The removable baffl e allows for
fl ushing debris. On most MASTER FOAM nozzles, changing the baffl e changes the nozzle's water fl ow rate.
A vacuum created by water velocity pulls foam concentrate into the nozzle. Foam concentrate enters the peripheral jet uniformly
at discharge without causing turbulence. Mixing and aeration happen immediately resulting in superior stream quality and reach.
MASTER FOAM nozzles use no clog prone small passageways.
MASTER FOAM Nozzles come with calibrated orifi ce plates to set the foam percentage. Orifi ce plates are easily inserted into the
side foam port. A concentrate hose with camlock fi tting (military standard MS27019) connects to the foam port capturing the orifi ce
plate.
Fog angle is user adjustable between 90° wide fog and straight stream. Higher fl ow (1000 GPM and higher) nozzles provide a set
screw for locking in a fog angle.
RANGE
INLET COUPLING
RATED PRESSURE
FLOW RATINGS
FOAM ORIFICE PLATES
CONCENTRATE HOSE SIZE
CAMLOCK CONNECTION ON
NOZZLE
FOG ADJUSTMENT
FOG TEETH
OPTIONAL FOAM ASPIRATOR
3.1 VARIOUS MODELS AND TERMS
The fi gures below show the Master Foam nozzles and identifi es the various parts and controls.
®
®
WARNING
Understand manual before use
Obtain safety information at
tft.com/serial-number
Serial Number
Coupling
©Copyright Task Force Tips LLC 2003 - 2018
SMALL
2.5" (65mm) NH, NPSH, or BSP
100 psi (7bar)
250, 350, 500 or 750 gpm
(950, 1325,1900 or 2900 l/min)
0.5%, 1%, 3% and 6%
10' x 1.5" diameter (2.4m x 38mm)
UV resistant
1.5" (38mm)
Halo ring is made from a non-
corroding high temperature
polymer
Molded rubber bumper and fog
teeth
FJ-LX-M FoamJet low expansion
air-aspirating attachment
+1 219 462-6161 • 800 348-2686
tft.com • MADE IN USA
U.S. Patent # 6,102,308
Foam Inlet
Orifice Plate
MEDIUM
3.5" (89mm) NH, NPSH, or BSP
100 psi (7bar)
1000 or 1250 gpm
(3800 or 4800 l/min)
1% and 3%
10' 1.5" x 2.0" diameter
(2.4m 38mm x 52mm)
UV resistant
1.5" (38mm)
All aluminum.
Rotate with folding handles
Cut metal fog teeth, hard
anodized aluminum
n/a
TM
Halo Ring
6
LARGE
3.5" (89mm) NH
4.0" (100mm) BSP
100 psi (7bar)
1500 or 2000 gpm
(5700 or 7600 l/min)
1% and 3%
10' x 2.0" diameter (2.4m x 52mm)
UV resistant
2.0" (52mm)
All aluminum.
Rotate with folding handles
Cut metal fog teeth, hard
anodized aluminum
n/a
Stream Shaper and Bumper
Baffle
LIZ-030 March 8, 2018 Rev12
Advertisement
Table of Contents
