Use Of The Ka 200 Easy Measuring Apparatus - YILMAZ CK 412 User Manual

7.2.7 Start the electrical motor by pressing the motor start button. (PICTURE 6 NO.36)
7.2.8 Begin the cutting operation by pressing the cutting start button (PICTURE 6 NO.35). The machine automatically
performs cutting operation and returns back to its starting position. Stop the electirical motor by pressing the
motor stop button. (PICTURE 6 NO 36)
NOTE: Remove the pressure on the cutting buttons in a possible hazard, or press the emergency stop
button.
7.2.9 Switch

7.3 Use of the KA 200 easy measuring apparatus

7.3.1 With the KA 200 Easy Measuring apparatus (PICTURE 8) it is possible to apply two different distance
measurements serially.
7.3.2 Press the measurement adjustment part against the upper inner section of the frame, which you want to take
the reference measurement from
7.3.3 Press the part Support 1 against the lower inner section of the frame, where you want to take the reference
measurement from, by loosening and moving the tightening handle. Tighten the handle again to fix the position.
7.3.4 You may repeat the above described operation for the part Support 2 as well to use it for the second reference
measurement.
(PICTURE 6 NO.34)
38