Tightness Inspection - Nilfisk-Advance VHC110 Instructions For Use Manual

VHC110 - VHC120

Tightness inspection

Hoses check
Make sure that connecting hoses (1) are in a good condition
and correctly fixed.
If the hoses are damaged, broken or badly connected to the
unions, they must be replaced.
When sticky materials are treated, check for possible clogging
along the hose, in the inlet and on the baffle plate inside the
filtering chamber.
To clean, scrape the inlet (2) from the outside to remove
deposits.
Filtering chamber gasket check
Make sure that the container (2) is tight with the filter chamber
(3).
Replace the dust container gasket (1) or the liquid container
gasket (4) if it is not tight, or if it is torn, cut, etc.
I
GB
E
E
C447
Figure 12
Figure 14
Disposal
Equipment marked with the crossed-out wheeled bin symbol
indicates that used electrical and electronic equipment should
not be discarded together with unseparated household
waste. To avoid negative effects on human health and the
environment the equipment must be collected separately at
the designated collection points.
Users of electrical and electronic household equipment must
use the municipal collection schemes. Please note that
commercially used electrical and electronic equipment, shall
not be disposed of via municipal collection schemes. We will
be pleased to inform you about suitable disposal options.
14
Figure 13
08/2018