Paper And Plastic Bag; Safe Dust Bag; Replacement Of Dust Bags - Nilfisk-Advance VHC110 Instructions For Use Manual

VHC110 - VHC120

Paper and plastic bag

The vacuum cleaner can be equipped with dust collection bag
(*) (Fig. 7).
If the bag is not installed or is installed incorrectly, this could
create health risks for persons exposed.
The Dust Bag requires the use of a specific container
and the cap on the side.

Safe Dust Bag

The vacuum cleaner can be equipped with dust collection bag
(*) (Fig. 8).
If the bag is not properly installed, it could create health risks
for people exposed.
For the codes, see the Recommended Spare Parts table
The Safe Bag requires the use of a specific container
and the cap on the side.
I
GB
E
E
C447
[ NOTE ]
[ NOTE ]

Replacement of dust bags

■ These operations can only be carried out by
trained and qualified personnel who must wear
adequate clothing, in compliance with the laws in
force.
■ Take care not to raise dust when this operation is
carried out. Wear a P3 protective mask.
■ In case of hazardous and/or harmful dust, use
only the bags recommended by the manufacturer
(see "Recommended spare parts").
■ The bag must only be disposed of by qualified
personnel and in compliance with the laws in
force.
Installing a paper bag not suitable for the class of dust
to be vacuumed, or incorrect installation, can create
a health risk for people exposed.
Replacement of the paper and plastic bag
■ Release the dust container.
■ Remove the bag and close it with the relevant cap (1) as
shown in the figure.
■ Insert a new bag, making sure the bag inlet is sealed.
■ Place the dust container in the vacuum cleaner.
Use only original Nilfisk bags.
How to replace the Safe Bag
■ Remove and put the vacuum hose in a safe and dust-
free place.
■ Close the inlet by using the relevant cap (1).
■ Release the dust container.
■ Close the connecting part between the two plastic
openings with a plastic clamp (2).
■ Remove the relevant connection (3) of the bag from the
inlet.
■ Fasten the two plastic openings (4).
■ Close the plastic bag using the relevant band (5).
■ Insert a new safe bag, making sure the vacuum inlet
is well connected to the bag attachment, to grant the
sealing.
■ Wrap the plastic bag around the dust container external
wall.
■ Place the dust container in the vacuum cleaner.
Use only original Nilfisk bags.
10
WARNING!
WARNING!
Figure 7
WARNING!
Figure 8
WARNING!
08/2018