At The End Of A Cleaning Session; Maintenance, Cleaning And Decontamination - Nilfisk-Advance VHC110 Instructions For Use Manual

At the end of a cleaning session

■ Close the on/off valve to stop vacuuming.
■ Clean the vacuum cleaner as described in the
"Maintenance, cleaning and decontamination" paragraph.
■ Store the device in a dry place, out of reach of
unauthorized people.
■ Lock the castor brakes (6, Fig. 1).
08/2018
Maintenance, cleaning and
decontamination
To guarantee the safety level of the vacuum cleaner,
only original spare parts supplied by the manufacturer
should be used.
The precautions described below must be taken during
all maintenance operations, including cleaning and
replacing the primary and absolute filters.
■ If the user is performing the maintenance operations,
the vacuum cleaner must be disassembled, cleaned
and overhauled as far as reasonably possible without
hazards for the maintenance personnel or other people.
The suitable precautions include decontamination before
disassembling the vacuum cleaner, adequate filtered
ventilation of the exhaust air from the room in which it
is disassembled, cleaning the maintenance area and
suitable personal protection.
■ The external parts of the vacuum cleaner must be
decontaminated by cleaning and vacuuming methods,
dedusted or treated with sealant before being taken out
of a hazardous zone.
■ All parts of the vacuum cleaner must be considered
as contaminated when they are removed from the
hazardous zone and appropriate actions must be taken
to prevent dust from dispersing.
■ When maintenance or repair procedure are carried out,
all the contaminated elements that cannot be properly
cleaned, must be eliminated.
■ These elements must be disposed of in sealed bags in
accordance with applicable regulations and local laws on
the disposal of such material.
■ This procedure must also be followed when the filters are
eliminated (primary and absolute filters).
■ Compartments that are not dust-tight must be opened
with suitable tools (screwdrivers, wrenches, etc.) and
thoroughly cleaned.
■ A check must be carried out by the manufacturer or the
personnel of the same at least once a year. For example:
check the air filters to find out whether the air-tightness of
the vacuum cleaner has been impaired.
13
VHC110 - VHC120
WARNING!
WARNING!
I
GB
E
E
C447