Table of Contents
Advertisement
Timed event
A timed event is based on a specific time of day. This example describes how to turn on lights at 7:00
a.m. and then turn off lights at 5:00 p.m.
1:
Within the Arch Setup menu, select the Timeclock menu, and make sure Timeclock is set to
"Enabled".
2:
Press [Down]
3:
Press [Enter]
[Up]
"2".
4:
Press [Enter]
5:
Press [Down]
None
. For this example select
6:
Press [Enter]
7:
Using the same menu selection techniques, set the
options shown to the right.
To activate the timed event:
1:
Navigate to the Arch Control menu.
2:
Select the Presets menu.
3:
Scroll to Preset # and select the event preset number,
(in this example we use #2).
4:
Scroll down one more line to Activate and press [Enter]
Your Timed Event will now activate preset #1 every Monday at 5:00 p.m. until manually modified.
Menu Flow Chart
See
Holiday shut-off
A holiday shut-off is programmed to temporarily deactivate all presets and sequences set to run during
normal operation. A Holiday Shut-off can be programmed to run for 1–7 days.
1:
Navigate to the Arch Control menu.
2:
Select the Start Holiday Shut-off option.
3:
Navigate to Shut-Off for: line at the bottom of the screen.
4:
Use the [Up]
5:
Press [Enter]
6:
press the [Up]
7:
Press [Enter]
The following screen will appear asking you to confirm the start of
the Holiday Shut-off.
• Pushing [Enter]
five minute countdown is completed.
• Pushing [Back] (<) will cancel the Holiday Shut-off.
46
to advance to the Schedule Events option.
and advance to the "Event Number" selection. Use the numeric keypad or the
or [Down]
buttons to enter the event number. For this example, the event number is
to commit the selection.
to navigate to Action. The options for this line include
Preset
to commit the selection.
page 38
on
for the full menu flow.
or [Down]
buttons to select either a 24 or 48 hour run time.
.
to navigate to the Start Holiday Shut-Off command.
.
will start the Holiday Shut-off before the
.
.
Power Control Processor Configuration Manual
Preset
,
Sequence
Schedule Events
Event Number:
Action:
Space:
Preset:
Recurrence:
When:
Time of Day
Time:
Holiday Shut-Off
begins in 5:00
When this time
expires Scheduled
Events will be
overridden.
[Push Enter to start]
[Push Back to cancel]
, and
2
Preset
1
1
Monday
5:00pm
Advertisement
Table of Contents
Need help?
Do you have a question about the Power Control Processor and is the answer not in the manual?
Questions and answers