Advertisement
Quick Links
ETC Installation Guide
Power Control Processor Mk2 Replacement Kit
Overview
Note:
Power Control Processor Mk2 is already installed.
The Power Control Processor Mk2 (PCP-Mk2)
is used in Echo Relay Panel Mains Feed and
Elaho Relay Panel Mains Feed (ERP Mains
Feed), Echo Relay Panel Feedthrough and
Elaho Relay Panel Feedthrough (ERP
Feedthrough), and Sensor IQ systems. These
systems support field-replacement of the
PCP-Mk2 and the Termination Board to which
it connects. To replace the PCP-Mk2,
complete all of the procedures:
1.
Replace the Power Control Processor
Mk2
Configure the Processor on page 4
2.
Access the Factory Menu on page 4
a.
b.
Power Calibration on page 4
If you are replacing the Termination Board,
you only need to complete the
Calibration on page 4
Termination Board
7123B5607 for ERP Mains Feed 120V
7123B5609 for ERP Mains Feed 277 V
Corporate Headquarters n Middleton, WI, USA | +1 608 831 4116
Global Offices n London, UK | Rome, IT | Holzkirchen, DE | Paris, FR | Hong Kong | Dubai, UAE | Singapore
New York, NY | Orlando, FL | Los Angeles, CA | Austin, TX | © 2023 Electronic Theatre Controls, Inc.
Web
Trademark and patent info:
Product information and specifications subject to change. ETC intends this document to be provided in its entirety.
7123M3310 Rev B Released 2023-10
The Power Control Processor Mk2 Replacement Kit is for use with panels where a
Power
.
etcconnect.com
| Support
support.etcconnect.com
etcconnect.com/ip
Power Control
User Interface Part
System
Number
ERP Mains
7123K1028-REPLC
Feed 120 V
ERP Mains
7123K1028-REPLC
Feed 277 V
ERP
7123K1028-REPLC
Feedthrough
EchoDIN*
7123A1321
Sensor IQ
7123K1028-REPLC
*Refer to the EchoDIN Power Control Processor Mk2
Installation Guide and the Power Control Processor Mk2
Configuration Manual at etcconnect.com.
Power Control Processor Mk2
Termination Board
7131B5607 for Sensor IQ
| Contact
etcconnect.com/contactETC
| Third-party license agreement
info: etcconnect.com/licenses
Power Board Part
Number
7123B5607
7123B5609
not applicable
not applicable
7131B5607
Advertisement
Related Manuals for ETC 7123K1028-REPLC
Summary of Contents for ETC 7123K1028-REPLC
- Page 1 New York, NY | Orlando, FL | Los Angeles, CA | Austin, TX | © 2023 Electronic Theatre Controls, Inc. etcconnect.com | Support support.etcconnect.com | Contact etcconnect.com/contactETC Trademark and patent info: etcconnect.com/ip | Third-party license agreement info: etcconnect.com/licenses Product information and specifications subject to change. ETC intends this document to be provided in its entirety. 7123M3310 Rev B Released 2023-10...
- Page 2 ETC Installation Guide PCP Mk2 Replacement Kit WARNING: RISK OF DEATH BY ELECTRIC SHOCK! Failure to disconnect all power to the panel before working inside could result in serious injury or death. AVERTISSEMENT : RISQUE DE MORT PAR ÉLECTROCUTION! Travailler à...
- Page 3 • Keep any spacers that were installed with these screws. You will need a total of three spacers to install the RideThru Option Card on the new user interface. Two spare spacers (ETC part number HW9444) are included in the Power Control Processor Mk2 Replacement Kit.
-
Page 4: Power Calibration
ETC Installation Guide PCP Mk2 Replacement Kit Configure the Processor Note: After configuring the PCP-Mk2 via the UI, save the configuration file and reboot the PCP-Mk2. See Save Configuration on the facing page Reboot the Processor on the facing page. - Page 5 Save Configuration Save Configuration with ETC Concert ETC Concert v4.4.0 or later can save and export configuration files from the PCP-Mk2 v4.1.0 and later as part of a project. For more information about configuration and file operations in Concert, select Help from the menu of the Concert application. Concert is available for free download at etcconnect.com.