ETC Power Control Processor Configuration Manual page 34

Indefinite Hold
Indefinite Hold is enabled through the Arch Control menu. Select "Start Indefinite Hold" to start an
Indefinite Hold. See
While an Indefinite Hold is running, all other scheduled events will be overridden and will not occur.
The Indefinite Hold must be manually released before the schedule is reinstated.
H o l i d a y S h u t - O f f
The Holiday Shut-Off feature provides an easy (CA Title 24 compliant) way to temporarily disable the
timed event schedule and turn lighting off in designated spaces. Settings are available for shut-off for
1–7 days.
When "Start Holiday Shut-Off" is selected, the program begins a five minute countdown. At any time
during this countdown, you may cancel the Holiday Shut-Off by pressing the [Back] (<) button.
After five minutes, Shut-Off plays in the specified spaces.
If manual control is initiated during Holiday Shut-Off, a Timed Hold will start to temporarily permit the
manual lighting control. When the hold time expires, lights shut off in specified spaces replacing any
manual control, and Holiday Shut-Off is reinstated using the time remaining.
T i m e c l o c k
Displays as either Enabled or Disabled.
S c h e d u l e E v e n t s
Allows for programming of both timed events that happen at a
specific time and astronomical events that happen relative to
sunrise or sunset.
• Event Number: Defaults to last known selection.
• Action: Options are Preset, Sequence, and Off.
• Space: Options are dependent on the previous Action settings and show 1–16. The default is 1.
• Preset: Also dependent on the previous Action setting,
options are 1–64 with a default of "1".
• Recurrence: Options are Everyday, Weekdays, Weekends,
and each day; Monday–Sunday. Default is "Everyday".
• When: Opens a new menu screen where you can select one
of the following; Time of day, Before Sunrise, After Sunrise,
Before Sunset, After Sunset, At Open Time, or At Close
Time.
• Time: Allows you to enter hh:mm am/pm with a default of
12:00 am. Options are dependent on the settings in the
When menu.
• Auto Timed Hold: Indicates if a timed hold has been programmed.
28
Arch Control Menu
on
page 32
.
Power Control Processor Configuration Manual
Timeclock
Timeclock:
Schedule Events
Timeclock Settings
Config Holiday Spaces
Open/Close Settings
Timed Hold Active
AUG 05, 2016 Hr:Min AM/PM
Schedule Events
Event Number
Action:
Space:
Preset:
Recurrence: Everyday
When: Time of Day
Time: --:-- am
Auto Timed Hold:
Enabled
1
Preset
1
1
Yes