ETC Ion Xe RPE Setup Manual

ETC Setup Guide
Ion Xe Remote Processor Unit
This guide outlines the setup and configuration of your Ion Xe RPU. For information on using the Eos Family
software installed on your RPU, please refer to the Eos Ti, Eos, and Gio Operations Manual that shipped
with your console or you may download it from our website at www.etcconnect.com.
The Ion Xe RPU can be used as a primary, backup, or client processor with any Eos Family desk. It can also
be used for independent playback applications. The Ion Xe RPU ships with the following:
• Remote Processor Unit
• USB Keyboard
• USB Mouse
• Rack Mount Hardware Kit
• IEC Power cord
• Label Set
• This Setup Guide and Current Release Note Documentation
Hardware Setup
Rear Panel
Hard Power Switch
IEC Power
Connector
1: Attach the IEC power cord to the power connector.
2: Connect any monitors to the display ports on the back of the RPU.
3: Connect the mouse and keyboard to the USB connectors.
4: Attach network ethernet cable(s) to the ethernet port(s).
5: Once all accessories have been connected, you may activate the hard power switch on the rear panel.
Corporate Headquarters
London, UK
Rome, IT
Holzkirchen, DE
Hong Kong
Web:
Product information and specifications subject to change. ETC intends this document to be provided in its entirety.
4311M2210
Two USB
Ports
Two
Display
Ports
Middleton, WI, USA

Tel +44 (0)20 8896 1000 Service: (UK)
 
Tel +39 (06) 32 111 683 Service: (UK)
 
Tel +49 (80 24) 47 00-0

Tel +852 2799 1220 Service: (Asia)
 
etcconnect.com © 2017 Electronic Theatre Controls, Inc.

Rev A Released 2017-08
 
Ethernet
Ports 1 & 2
Two USB
Ports
Audio Ports
(Not Currently
Enabled)
Tel +608 831 4116 Service: (Americas)
 
service@etceurope.com
service@etceurope.com
Service: (DE) techserv-hoki@etcconnect.com

service@etcasia.com
Remote
Trigger
Four DMX512A/
RDM Ports
service@etcconnect.com