ETC E-ACP Configuration

How to save a drd for echo configuration and arch configuration to usb

How to save a DRd for Echo Configuration and Arch Configuration to

USB

Why Should I backup my Echo E-ACP Configuration?

Keeping a backup of all your configurations is always a good idea. It gives you a point to return to should something go

wrong in your system, and allows you to easily load configurations into a loaner processor or replacement if necessary.

It is important to do a backup whenever you are about to make a system change, like a firmware update, as well.

Backup can also be performed to SD Media. If you choose to use an SD Card, please

choose SD instead of USB in the menus mentioned below.

• Insert a USB into the USB drive at the front of the Echo Processor.

• Tap Check to enter the main menu.

• Using the wheel around the check (like an old iPod) to scroll down to File Operations. Press Check.

• Choose Save Rack Configs and press Check.

https://support.etcconnect.com/ETC/Architectural/Echo/DRd/How_to_save_a_DRd_for_Echo_Configuration_and_Arch_Confi...

Updated: Sun, 19 Sep 2021 04:44:12 GMT

Table of Contents

Do you have a question about the E-ACP and is the answer not in the manual?

Page 1 How to save a DRd for Echo Configuration and Arch Configuration to Why Should I backup my Echo E-ACP Configuration? Keeping a backup of all your configurations is always a good idea. It gives you a point to return to should something go wrong in your system, and allows you to easily load configurations into a loaner processor or replacement if necessary.
Page 2 • If you would like to rename the configuration you can do so here by appending an number other than 1 to the end. • Choose Save to USB Media and press Check. https://support.etcconnect.com/ETC/Architectural/Echo/DRd/How_to_save_a_DRd_for_Echo_Configuration_and_Arch_Confi… Updated: Sun, 19 Sep 2021 04:44:12 GMT...
Page 3 • It will save, this can take a minute. Related Links/References • Echo Architectural Control Processor (ACP) v2.0.0 Configuration Manual https://support.etcconnect.com/ETC/Architectural/Echo/DRd/How_to_save_a_DRd_for_Echo_Configuration_and_Arch_Confi… Updated: Sun, 19 Sep 2021 04:44:12 GMT Powered by...