Bras B-Cube HOT Operator's Manual page 21

7. 5. 5 REASSEMBLING THE
RECOVER
1
Place the right-hand part of the recover on a
surface. Place the container inside it . (see figure
15)
figure 15
2
Put the left-hand part of the recover into posi-
tion and make sure that it fits into the illustrated
groove. Click the two parts together. (see figure
16).
figure 16
7. 5. 6 ASSEMBLY
1
Slide the drip tray into place.
2
Lubricate faucet piston, outer spiral and
outside magnetic rotor (see points A, B and C of
figure 17) only with the grease supplied by the
manufacturer or other food grade approved
lubricant.
3
Assemble the faucet by reversing the
disassembly steps (see figure 13)
4
Fit bowl gasket around its seat.
Note: the largest brim of gasket must face
against the rear wall (see figure 18).
5
Insert the magnetic outside rotor in the
evaporator taking care to accompany it to the
21
figure 17
figure 18