Connect The System To Power - FujiFilm VisualSonics Vevo MD Getting Started Manual

Connect the system to power

Warning: Verify that the supply voltage corresponds to the power supply
voltage range. Using incorrect voltage may damage the system.
Warning: Plug the system only into a grounded outlet. Using a non-
grounded outlet may damage the system.
Warning: Use only power cords provided by FUJIFILM SonoSite with the
system. Using power cords from other sources, may damage the system.
1 Connect the AC power cord, located in the accessory box, to the stand base and
secure the AC power cord with the retainer wire.
2 Connect the AC power cord to an outlet.
Figure 1-9 The AC power cord connector, retainer wire and power switch.
13 Vevo MD Getting Started Guide - English