FujiFilm VisualSonics Vevo MD Getting Started Manual page 15

Caution: When using AC power, position the system to allow easy access
to disconnect it.
To disconnect from power
Before unplugging the AC power cord or using the power switch, turn off the system
using the power button.
1 Press the power button.
2 Turn off using the power switch.
3 Unplug the AC power cord from the outlet.
4 Release the retainer wire and disconnect the AC power cord from the stand base.
Note: Restarting the system while it is performing data-intensive background
activities, such as exporting data files, can result in loss of data.
FUJIFILM SonoSite recommends waiting at least 3 minutes before restarting an
unresponsive system. To power down an unresponsive system, press and hold
the power button until the system shuts down. This procedure may take 5
seconds or longer.
15 Vevo MD Getting Started Guide - English