Enttec DATAGATE MK2 Quick Start Manual page 6

Merge
:
HTP or LTP merge operator, drag as many lines to
the input node as you wish to merge
• HTP Merge: Higher Takes Precedence - The
biggest DMX value will be output per channel
• LTP Merge: Latest Takes Precedence - The latest
DMX value will be output per channel
Shifter:
can be used to shift a number of channels to
another spot in the INPUT DMX frame
Channels not defined will be left at 0 value
Example: To Shift 100 channels from 10 to 210:
Setup as "start listening at": 10 and, "start sending at":
210, "number of channels": 100
Switcher 1-2:
Controllable Switch operator, when the
trigger channel (Switch) is greater than the set value,
OUTPUT B is output, in other cases OUTPUT A is output.
Must have all input sources and output sources
connected
Switcher 2-1:
Controllable Switch operator, acts as a
normal Input A to Output Action, but when the trigger
6
value is greater than the set Switch it does Input B to Output
Action
Must have all input sources and output sources connected.
Compressor proportionally reduces all channels of the input
according to the value on the control channel.
For example: if control value input is 127 all the values on
the input will be reduced to 50% at output.
This OSC module will allow control from an OSC controller
on port 8000.
In each OSC message, there is another argument to convey
level which is a float between 0 and 255.
Limitation: Only one OSC module allowed in the profile
OSC Instructions:
OSC Generator module:

Send DMX from Datagate using OSC commands

IP address is not used

Send OSC on port 8000 to Datagate's IP address
TouchOSC Examples:
/dgmk2/4 220 : sends value 220 on 5th DMX channel
/dgmk2/127 125 : sends value 125 on 128th DMX channel
How to send OSC packets using UDP:
OSC packet needs to be in multiple of 4 bytes and spaced
accordingly.
OSC packet must be sent in 3 segments (tag, format, value)
tag=/dgmk2/<ch>
format= ,f
value= <float>
Each segment must be a multiple of 4 bytes. Pad with 00 at
the end, if required
Quick Start Manual
Datagate MK2 70044
For latest version visit:
www.enttec.com
ID: 2691