Security Configuration - Avalue Technology OFT-15W33 Quick Reference Manual

XHCI Hand-off
USB Mass Storage Driver Support
USB transfer time-out
Device reset time-out
Device power-up delay
Mass Storage Devices

3.6.2.12 Security Configuration

Item
TXE HMRFPO
TXE EOP Message
Enabled[Default]
Disabled
Disabled
Enabled[Default]
1 sec
5 sec
10 sec
20 sec[Default]
10 sec
20 sec[Default]
30 sec
40 sec
Auto[Default]
Manual
Auto[Default]
Floppy
Forced FDD
Hard Disk
CD-ROM
Options
Enabled,
TXE HMRFPO.
Disabled[Default]
Enabled[Default],
Send EOP Message Before Enter OS.
Disabled
Quick Reference Guide
This is a workaround for OSew without XHCI
hand-off support. The XHCI ownership change
should be claimed by XHCI driver.
Enable/Disable USB Mass Storage Driver
Support.
The time-out value for Control, Bulk, and Interrupt
transfers.
USB mass storage device Start Unit command
time-out.
Maximum time the device will take before it
properly reports itself to the Host Controller. 'Auto'
uses default value: for a Root port it is 100ms, for
a Hub port the delay is taken form Hub descriptor.
Mass storage device emulation type 'AUTO'
enumerates devices according to their media
format. Optical drives are emulated as 'CDROM',
drives with no media will be emulated according
to a drive type.
Description
OFT-15W33 Quick Reference Guide 79