Avalue Technology OFP-21W33 Quick Reference Manual
  1. Manuals
  2. Brands
  3. Avalue Technology Manuals
  4. Touch Panel
  5. OFP-21W33
  6. Quick reference manual

Avalue Technology OFP-21W33 Quick Reference Manual

21.5" open frame panel pc
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OFP-21W33
21.5" Open Frame Panel PC
Quick Reference Guide
Ed – 26 April, 2022
st
1
Copyright Notice
Copyright  2022 Avalue Technology Inc., ALL RIGHTS RESERVED.
Part No. E2017O213A2R

Advertisement

Table of Contents
loading

Related Manuals for Avalue Technology OFP-21W33

Summary of Contents for Avalue Technology OFP-21W33

  • Page 1 OFP-21W33 21.5" Open Frame Panel PC Quick Reference Guide Ed – 26 April, 2022 Copyright Notice Copyright  2022 Avalue Technology Inc., ALL RIGHTS RESERVED. Part No. E2017O213A2R...
  • Page 2 (2) Use only shielded cables to connect I/O devices to this equipment. (3) Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 2 OFP-21W33 Quick Reference Guide...
  • Page 3 RF exposure compliance, in order to comply with RF exposure limits established in the ANSI C95.1 standards, the distance between the antennas and the user should not be less than 20 cm. OFP-21W33 Quick Reference Guide...
  • Page 4 “CAUTION - Use a power cord that matches the voltage of the power outlet, which has been approved and complies with the safety standard of your particular country.” “WARNING – To avoid risk of electric shock, this equipment must only be connected to a supply mains with protective earth.” 4 OFP-21W33 Quick Reference Guide...

  • Page 5: Table Of Contents

    1.5.1 Front and Rear side ........................13 1.6 Panel Mounting ......................14 1.7 Wall Mounting......................27 Hardware Configuration ................... 39 OFP-21W33 connector mapping ................. 40 2.1.1 Serial Port connector (COM) ...................... 40 2.1.2 DC power-in connector (DC in) ....................41 Product Overview ....................
  • Page 6 3.6.2.3.4 Serial Port 4 Configuration ....................74 3.6.2.3.5 Serial Port 5 Configuration ....................74 3.6.2.4 H/W Monitor ........................75 3.6.2.4.1 Smart Fan Mode Configuration ..................75 3.6.2.5 S5 RTC Wake Settings ..................... 76 3.6.2.6 Serial Port Console Redirection ..................78 6 OFP-21W33 Quick Reference Guide...
  • Page 7 Install VGA Driver ....................103 Install Serial IO Driver ..................104 Install TXE Driver ....................105 Install Audio Driver (For Realtek ALC662 HD Audio) ........106 Install LAN Driver (For Intel I211AT) ..............107 Development Resource ..................109 OFP-21W33 Quick Reference Guide...

  • Page 8: Getting Started

    Place all electronic components in a static-dissipative surface or static-shielded bag when they are not in the chassis. 1.2 Packing List 1 x OFP-21W33 Open Frame Panel PC  8 OFP-21W33 Quick Reference Guide...

  • Page 9: System Specifications

    DP++, HDMI/DP(HDMI/DP: 3840 x 2160 @ 30Hz, 2560 x 1600 @ 30Hz) Audio Port Line-out, Mic-in 2 x RJ45 LAN port (2 x Intel® I211AT, 10/100/1000 Base-Tx Gigabit LAN Port Ethernet Compatible) Wireless LAN 2 x Antenna Mounting with Dust Cover OFP-21W33 Quick Reference Guide...
  • Page 10 2 Test frequency : 5~500 Hz 3 Test axis : X,Y and Z axis 4 Test time : 30 minutes per each axis 5 IEC 60068-2-64 Test Fh Mechanical Shock 1 Wave from : Half Sine wave 10 OFP-21W33 Quick Reference Guide...
  • Page 11 4-feet drop resistance without package MIL-STD-810G Operating 0°C ~ 45°C (32°F ~ 113°F) Temperature Operating 0% ~ 90% Relative Humidity, Non-condensing Humidity Storage -20°C ~ 60°C (-4°F ~ 140°F) Temperature Note: Specifications are subject to change without notice. OFP-21W33 Quick Reference Guide 11...

  • Page 12: System Overview

    2 x RJ-45 Ethernet Line-out Line-out jack Mic-in audio jack Mic-in DC power-in connector DC in DC in 2 pins Phoenix connector 2 x DP connector DP1/2 Power Switch 2 pins Phoenix connector for remote power 12 OFP-21W33 Quick Reference Guide...

  • Page 13: System Dimensions

    Quick Reference Guide 1.5 System Dimensions 1.5.1 Front and Rear side (Unit: mm) OFP-21W33 Quick Reference Guide 13...

  • Page 14: Panel Mounting

    OFP-21W33 1.6 Panel Mounting Panel mount is the solution for mounting OFP into the opening of wall (or cabinet). The dimension of opening is as below: (Opening dimension) (Panel thickness) (Installation surface) (Unit: mm) 14 OFP-21W33 Quick Reference Guide...
  • Page 15 Quick Reference Guide Step1. Insert and fasten 10 pcs Hexagon Studs on each side of the OFP-21W33 Panel Bracket. Hexagon Stud OFP-21W33 Item Part Name Quantity OFP-21W33 Quick Reference Guide 15...
  • Page 16 OFP-21W33 Step2. Assemble the 2pcs Bracket-RL on the left and right sides of the OFP-21W33 bracket by fastening 4 pcs screws on each side. Screw Bracket-RL Item Part Name Quantity 16 OFP-21W33 Quick Reference Guide...
  • Page 17 Quick Reference Guide Step3. Assemble the Front Bracket to OFP-21W33 and fasten 10 pcs screws on the corresponding Hexagon Studs. Front Bracket Screw Item Part Name Quantity OFP-21W33 Quick Reference Guide 17...
  • Page 18 OFP-21W33 Step4. Assemble the 6pcs Panel kit Brackets on the Front Bracket and fasten the 16 pcs screws to the corresponding holes. Screw Panel kit Bracket Item Part Name Quantity 18 OFP-21W33 Quick Reference Guide...
  • Page 19 Quick Reference Guide (outside the wall (or cabinet) opening) Step5. Embed the OFP-21W33 semi-finished product into the wall (or cabinet) opening. Wall Item Part Name Quantity OFP-21W33 Quick Reference Guide 19...
  • Page 20 Step6. Fasten the Panel mount screw*12 to the Panel mount kit bracket*12 (as shown in Figure 6-1), and then attach them to the Panel Kit Bracket*6 fixing slots. Figure 6-1 Panel mount Screw Panel Mount Kit Bracket Panel Kit Bracket Item Part Name Quantity 20 OFP-21W33 Quick Reference Guide...
  • Page 21 Quick Reference Guide OFP-21W33 Quick Reference Guide 21...
  • Page 22 Step7. Fasten the Panel mount screw*12 against the wall, so that the entire module can be secured by the Panel mount screws and Panel mount kit brackets. Panel mount Screw Wall Item Part Name Quantity 22 OFP-21W33 Quick Reference Guide...
  • Page 23 Quick Reference Guide (The diagram is demonstrated by OFT-10W01, but the concept “the entire module can be secured by fastening the Panel mount screws against the wall” is the same) OFP-21W33 Quick Reference Guide 23...
  • Page 24 OFP-21W33 Step8. Paste the 2 pcs U Plates on the Front Bracket to complete installation. U Plate Front Bracket Item Part Name Quantity 24 OFP-21W33 Quick Reference Guide...
  • Page 25 Quick Reference Guide Step9. Paste the Decoration Plate on the U Plate to complete installation. Decoration Plate U Plate Item Part Name Quantity OFP-21W33 Quick Reference Guide 25...
  • Page 26 OFP-21W33 26 OFP-21W33 Quick Reference Guide...

  • Page 27: Wall Mounting

    Quick Reference Guide 1.7 Wall Mounting Wall mount is the solution for mounting OFP into the wall. Size of the opening: (Opening dimension) (Wall box installation dimension) (Installation surface) (Unit: mm) OFP-21W33 Quick Reference Guide 27...
  • Page 28 OFP-21W33 Screw hole location: (Unit: mm) 28 OFP-21W33 Quick Reference Guide...
  • Page 29 Step1. Install the 21” Wall Box and fix it on the wall, and use suitable screws to lock the wall box (the screws can be purchased according to actual needs) Wall box Item Part Name Quantity OFP-21W33 Quick Reference Guide 29...
  • Page 30 OFP-21W33 Step2. Assemble the 2pcs Bracket-RL on the left and right sides of the OFP-21W33 bracket by fastening 4 pcs screws on each side Screw Bracket-RL OFP-21W33 Item Part Name Quantity 30 OFP-21W33 Quick Reference Guide...
  • Page 31 Quick Reference Guide Step3. Fasten 10 pcs Hexagon Studs on each side of the OFP-21W33 Bracket. Hexagon Stud BCX11_156_ASSY Item Part Name Quantity OFP-21W33 Quick Reference Guide 31...
  • Page 32 OFP-21W33 Step4-1. Assemble the Front bracket to OFP-21W33, and fasten 14 pcs screws to the 10 corresponding Hexagon Studs locations and 4 Bracket R/L locations. Step4-2. Fasten the 3 pcs wall mount kit to the top of the Front bracket with 6pcs screws Step4-3.
  • Page 33 Quick Reference Guide OFP-21W33 Quick Reference Guide 33...
  • Page 34 OFP-21W33 34 OFP-21W33 Quick Reference Guide...
  • Page 35 Quick Reference Guide Step5. Fasten the Ground wire with 2 screws on the ground screw holes of Front bracket and Wall box. Ground wire Screw Front bracket Wall box Item Part Name Quantity OFP-21W33 Quick Reference Guide 35...
  • Page 36 OFP-21W33 Step6. Wrap the Kensington lock (option) around the hole in the Front bracket and attach the lock to the keyhole in the Wall box. Kensington lock Front bracket Wall box Item Part Name Quantity 36 OFP-21W33 Quick Reference Guide...
  • Page 37 Quick Reference Guide Step6-1. Store the Ground wire and Kensington lock in the Wall box and embed the OFP-21W33 semi-finished product into the wall (Wall Box). Step6-2. Paste the Decoration Plate on the Front bracket to complete installation. PC bezel...
  • Page 38 OFP-21W33 38 OFP-21W33 Quick Reference Guide...

  • Page 39: Hardware Configuration

    Quick Reference Guide 2. Hardware Configuration For advanced information, please refer to: 1- EMX-APLP included in this manual. Note: If you need more information, please visit our website: http://www.avalue.com.tw OFP-21W33 Quick Reference Guide 39...

  • Page 40: Ofp-21W33 Connector Mapping

    In RS-232 Mode Signal PIN PIN Signal NDCD# NDSR# NRXD NRTS# NTXD NCTS# NDTR# NRI# In RS-422 Mode Signal PIN PIN Signal TxD1- TxD1+ RxD1+ RxD1- In RS-485 Mode Signal PIN PIN Signal DATA1- DATA1+ 40 OFP-21W33 Quick Reference Guide...

  • Page 41: Dc Power-In Connector (Dc In)

    Quick Reference Guide 2.1.2 DC power-in connector (DC in) Signal +V12-24_DCIN OFP-21W33 Quick Reference Guide 41...

  • Page 42: Product Overview

    OFP-21W33 2.2 Product Overview 42 OFP-21W33 Quick Reference Guide...
  • Page 43 Quick Reference Guide OFP-21W33 Quick Reference Guide 43...

  • Page 44: Jumper And Connector List

    Label Function Note FAN1 CPU fan connector 4 x 1 wafer, pitch 2.54mm FPT1 Front Panel connector 1 5 x 2 header, pitch 2.54mm FPT2 Front Panel connector 2 5 x 2 header, pitch 2.54mm 44 OFP-21W33 Quick Reference Guide...
  • Page 45 Mini-PCIe connector 1 5 x 2 header, pitch 2.00mm JLPC1 LPC connector PWR1 Power connector 2 x 2 wafer, pitch 4.20mm SATA1/2 Serial ATA connector 1/2 SPWR1/2 SATA Power connector 1/2 4 x 1 wafer, pitch 2.54mm OFP-21W33 Quick Reference Guide 45...
  • Page 46 DCIN1 I2C1 I2C connector 5 x 1 header, pitch 2.00mm HDMI1 HDMI connector LOUT1 Line-out audio jack MIC1 Mic-in audio jack DMIC1 Digital Microphone connector 5 x 1 header, pitch 2.54mm SIM1 SIM card slot 46 OFP-21W33 Quick Reference Guide...

  • Page 47: Setting Jumpers & Connectors

    2.4.2 SATA2/MSATA1 mPCIe slot selector (JMSW1) SATA2 Connector* (SATA2 Connector enabled, MSATA1 slot Disabled) MSATA1 mPCIe slot (MSATA1 slot enabled, SATA2 Connector Disabled) * Default Note: SATA2/MSATA1 shared SATA signal, can not be used simultaneously. OFP-21W33 Quick Reference Guide 47...

  • Page 48: Lvds Back Light Power Selection (Jsbkl1)

    OFP-21W33 2.4.3 LVDS Back Light power selection (JSBKL1) PWM Mode*(Max current: 2A) DC Mode(Max current: 2A) * Default 2.4.4 AT/ATX Power Mode Select (JSATX1) ATX* * Default 48 OFP-21W33 Quick Reference Guide...

  • Page 49: Clear Cmos (Cmos1)

    Quick Reference Guide 2.4.5 Clear CMOS (CMOS1) Protect* Clear CMOS * Default 2.4.6 LCD Inverter connector (JBKL1) Signal +12V LVDS_BKLTEN LVDS_BKLADJ OFP-21W33 Quick Reference Guide 49...

  • Page 50: Serial Port 1/2 Connector (Com1/2)

    OFP-21W33 2.4.7 Serial port 1/2 connector (COM1/2) COM1 COM2 Signal PIN PIN Signal 2.4.8 Serial port 3/4/6 connector (COM3/4/6) Signal PIN PIN Signal 50 OFP-21W33 Quick Reference Guide...

  • Page 51: Serial Port 5 Connector (Com5)

    Quick Reference Guide 2.4.9 Serial port 5 connector (COM5) Signal PIN PIN Signal NDCD# NRXD NTXD NDTR# NDSR# NRTS# NCTS# NRI# 2.4.10 Serial Port 1 RS485/422 Mode connector (JRS485) Signal PIN PIN Signal 485TX- 422RX- 485TX+ 422RX+ OFP-21W33 Quick Reference Guide 51...

  • Page 52: General Purpose I/O Connector (Dio1)

    OFP-21W33 2.4.11 General purpose I/O connector (DIO1) Signal PIN PIN Signal SMB_CLK SMB_DATA 2.4.12 SATA Power connector 1/2 (SPWR1/2) SPWR1 SPWR2 Signal +V5S_SATA +V12S_SATA 52 OFP-21W33 Quick Reference Guide...

  • Page 53: Power Connector (Pwr1)

    Quick Reference Guide 2.4.13 Power connector (PWR1) Signal Signal +V12-24_DCIN +V12-24_DCIN 2.4.14 USB2.0 connector (USB3) Signal Signal +5VSB +5VSB USBDN4 USBDN5 USBDP4 USBDP5 OFP-21W33 Quick Reference Guide 53...

  • Page 54: Usb2.0 Connector (Usbh1)

    OFP-21W33 2.4.15 USB2.0 connector (USBH1) Signal Signal +5VSB +5VSB USB_HDN1 USB_HDN2 USB_ HDP1 USB_ HDP2 2.4.16 USB2.0 connector (USBH2) Signal USB_ HDP4 USB_HDN4 +5VSB 54 OFP-21W33 Quick Reference Guide...

  • Page 55: Lvds Connector (Lvds1)

    LVDS_DATAN1 11 12 LVDS_DATAN0 LVDS_DATAP3 15 16 LVDS_DATAP2 LVDS_DATAN3 17 18 LVDS_DATAN2 LVDS_DATAP5 21 22 LVDS_DATAP4 LVDS_DATAN5 23 24 LVDS_DATAN4 LVDS_DATAP7 27 28 LVDS_DATAP6 LVDS_DATAN7 29 30 LVDS_DATAN6 LVDS_CLK2P LVDS_CLK1P LVDS_ CLK2N LVDS_ CLK1N +12V +12V OFP-21W33 Quick Reference Guide 55...

  • Page 56: Battery Connector (Bt1)

    Front Audio connector (FAUD1) Signal PIN PIN Signal LINE2_JD LINE2_L SENSE_B MIC2_JD LINE2_R AUD_FRONT_DET MIC2_R MIC2_L 2.3.19.1 Signal Description –Front Audio connector (FAUD1) Signal Signal Description LINE2_JD AUDIO IN (LINE_RIN/LIN)sense pin MIC2_JD MIC IN (MIC_RIN/LIN) sense pin 56 OFP-21W33 Quick Reference Guide...

  • Page 57: Lpc Connector (Jlpc1)

    Quick Reference Guide 2.4.20 LPC connector (JLPC1) Signal PIN PIN Signal LPC_AD0 +3.3V LPC_AD1 PLT_RST# LPC_AD2 LPC_FRAME# LPC_AD3 LPC_CLK_DEB LPC_SERIRQ 2.4.21 EC_Program (EC1) Signal PIN PIN Signal +3.3A_ECSPI EC_FSCE# EC_FSCK EC_FSMIOSO EC_FSMOSI EC_HOLD# EC_SMBCLK EC_SMBDATA OFP-21W33 Quick Reference Guide 57...

  • Page 58: Spi Connector (Spi1)

    OFP-21W33 2.4.22 SPI connector (SPI1) Signal PIN PIN Signal +1.8VSB SPI_CS0# SPI_CLK SPI_MISO SPI_MOSI SPI_HOLD# 2.4.23 Sony/Philips Digital Interface (SPDIF1) Signal SPDIF_OUT 58 OFP-21W33 Quick Reference Guide...

  • Page 59: Speaker Connector (Spk1)

    Quick Reference Guide 2.4.24 Speaker connector (SPK1) Signal RSPK- RSPK+ LSPK- LSPK+ 2.4.25 Front Panel connector 1 (FPT1) Signal PIN PIN Signal +HD_LED +PWR_LED -HD_LED -PWE_LED +Reset +PWR_BNT -Reset -PWR_BNT OFP-21W33 Quick Reference Guide 59...

  • Page 60: Front Panel Connector 2 (Fpt2)

    2. BLK_UP with GND/BLK_DN with GND: Step control LVDS Backlight by use button and BIOS must to be set “BR Button”. (Please refer to page.61) 2.4.27 LED indicator connector 1 (LED1) Signal L1_1000#_LED L1_100#_LED L1_ACT_N L1_ACT_P 60 OFP-21W33 Quick Reference Guide...

  • Page 61: Led Indicator Connector 2 (Led2)

    Quick Reference Guide 2.4.28 LED indicator connector 2 (LED2) Signal L2_1000#_LED L2_100#_LED L2_ACT_N L2_ACT_P 2.4.29 CPU fan connector (FAN1) Signal +12V CPU_FANIN CPU_FANOUT OFP-21W33 Quick Reference Guide 61...

  • Page 62: Digital Microphone Connector (Dmic1)

    OFP-21W33 2.4.30 Digital Microphone connector (DMIC1) Signal DMIC_CLK DMIC_DAT +3.3VSB 2.4.31 eDP connector (EDP1) Signal PIN PIN Signal EDP_TXN0 EDP_TXN3 EDP_TXP0 EDP_TXP3 EDP_TXN1 EDP_TXP1 EDP_AUXN EDP_AUXP EDP_TXN2 EDP_TXP2 EDP_C_HPD EDP_VCC_PAL 19 20 EDP_VCC_PAL 62 OFP-21W33 Quick Reference Guide...

  • Page 63: I2C Connector (I2C1)

    Quick Reference Guide 2.4.32 I2C connector (I2C1) Signal +3.3V I2C5_INT# I2C5_LS_CLK I2C5_LS_DATA OFP-21W33 Quick Reference Guide 63...

  • Page 64: Bios Setup

    OFP-21W33 3.BIOS Setup 64 OFP-21W33 Quick Reference Guide...

  • Page 65: Introduction

    If you do not press the keys at the correct time and the system does not boot, an error message will be displayed and you will again be asked to. Press F1 to Continue, DEL to enter SETUP OFP-21W33 Quick Reference Guide 65...

  • Page 66: Using Setup

    Note: Some of the navigation keys differ from one screen to another.  To Display a Sub Menu Use the arrow keys to move the cursor to the sub menu you want. Then press <Enter>. A “” pointer marks all sub menus. 66 OFP-21W33 Quick Reference Guide...

  • Page 67: Getting Help

    BIOS Vendor and your systems manufacturer to provide the absolute maximum performance and reliability. Even a seemingly small change to the chipset setup has the potential for causing you to use the override. OFP-21W33 Quick Reference Guide 67...

  • Page 68: Bios Setup

    <Enter> to accept and enter the sub-menu. 3.6.1 Main Menu This section allows you to record some basic hardware configurations in your computer and set the system clock. 68 OFP-21W33 Quick Reference Guide...

  • Page 69: System Language

    Visit the Avalue website (www.avalue.com.tw) to download the latest product and BIOS information. 3.6.2 Advanced Menu This section allows you to configure your CPU and other system devices for basic operation through the following sub-menus. OFP-21W33 Quick Reference Guide 69...

  • Page 70: Trusted Computing

    INT1Ainterface will not be available. 3.6.2.2 ACPI Settings Item Options Description Enables or Disables System ability to Disabled Enable Hibernation Hibernate (OS/S4 Sleep State). This Enabled[Default], option may be not effective with some 70 OFP-21W33 Quick Reference Guide...

  • Page 71: It8528 Super Io Configuration

    You can use this item to set up or change the IT8528 Super IO configuration for serial ports. Please refer to 3.6.2.3.1~ 3.6.2.3.5 for more information. Item Description Serial Port 1 Configuration Set Parameters of Serial Port 1 (COMA). OFP-21W33 Quick Reference Guide 71...

  • Page 72: Serial Port 1 Configuration

    Set Parameters of Serial Port 5 (COME). 3.6.2.3.1 Serial Port 1 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled UART 232[Default], UART 232 422 485 UART 422, Change the Serial Port as RS232/422/485. UART 485 72 OFP-21W33 Quick Reference Guide...

  • Page 73: Serial Port 2 Configuration

    3.6.2.3.2 Serial Port 2 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled 3.6.2.3.3 Serial Port 3 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled OFP-21W33 Quick Reference Guide 73...

  • Page 74: Serial Port 4 Configuration

    3.6.2.3.4 Serial Port 4 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled 3.6.2.3.5 Serial Port 5 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled 74 OFP-21W33 Quick Reference Guide...

  • Page 75: H/W Monitor

    Enabled, Smart Fan Function Enable or Disable Smart Fan. Disabled[Default] 3.6.2.4.1 Smart Fan Mode Configuration Item Option Description Manual Mode[Default]/Mode 01/Mode CPU Smart Fan Mode CPU Smart Fan Mode Select. 02/Mode 03/Mode 04/Mode 05/Mode 06/Mode OFP-21W33 Quick Reference Guide 75...

  • Page 76: S5 Rtc Wake Settings

    Select Fixed Time, system will wake on Wake system from S5 Fixed Time the hr::min::sec specified. Select Dynamic Dynamic Time Time, System will wake on the current time + Increase minute(s). Wake up minute increase Wake up minute increase. 76 OFP-21W33 Quick Reference Guide...
  • Page 77 15 for 3pm. Select 0-23 For example enter 3 for 3am and Wake up minute 0-23 15 for 3pm. Select 0-23 For example enter 3 for 3am and Wake up second 0-23 15 for 3pm. OFP-21W33 Quick Reference Guide 77...

  • Page 78: Serial Port Console Redirection

    OFP-21W33 3.6.2.6 Serial Port Console Redirection Item Options Description Disabled[Default], Console Redirection Console Redirection Enable or Disable. Enabled 3.6.2.7 CPU Configuration Use the CPU configuration menu to view detailed CPU specification and configure the CPU. 78 OFP-21W33 Quick Reference Guide...

  • Page 79: Socket 0 Cpu Information

    Disabled, Thermal Monitor Enable/Disable Thermal Monitor. Enabled[Default] Disabled, Monitor Mwait Enabled Enable/Disable Monitor Mwait. Auto[Default] HW_ALL[Default] P-STATE Coordination SW_ALL Change P-STATE Coordination type. SW_ANY Disabled[Default], Enable/Disable Digital Thermal Sensor. Enabled 3.6.2.7.1 Socket 0 CPU Information OFP-21W33 Quick Reference Guide 79...

  • Page 80: Cpu Power Management Configuration

    This option controls the Max Core C State that Max Core C State Core C7 cores will support. Core C6 Core C1 Unlimited Disabled C-State Auto Demotion Configure C-State Auto Demotion. C1[Default] Disabled C-State Un-demotion Configure C-State Un-demotion. C1[Default] 80 OFP-21W33 Quick Reference Guide...

  • Page 81: Network Stack Configuration

    IPV6 HTTP boot option will not be created. Wait time to press ESC key to abort the PXE PXE boot wait time boot. Number of times presence of media will be Media detect count checked. OFP-21W33 Quick Reference Guide 81...

  • Page 82: Nvme Configuration

    Enabled UPON REQUEST – GA20 can be disabled using BIOS services. ALWAYS – do not Upon Request[Default] GateA20 Active Always allow disabling GA20; this option is useful when any RT code is executed above 1MB. 82 OFP-21W33 Quick Reference Guide...

  • Page 83: Usb Configuration

    Item Options Description Enables Legacy USB support. AUTO option Enabled[Default] disables legacy support if no USB devices are Legacy USB Support Disabled connected. DISABLE option will keep USB Auto devices available only for EFI applications. OFP-21W33 Quick Reference Guide 83...

  • Page 84: Security Configuration

    CD-ROM to a drive type. 3.6.2.12 Security Configuration Item Options Description Enabled, TXE HMRFPO TXE HMRFPO. Disabled[Default] Enabled[Default], TXE EOP Message Send EOP Message Before Enter OS. Disabled 84 OFP-21W33 Quick Reference Guide...

  • Page 85: System Component

    Quick Reference Guide 3.6.2.13 System Component Item Options Description Warm Reset[Default] OS Reset Select Select the reset type in FACP table. Cold Reset 3.6.3 Chipset OFP-21W33 Quick Reference Guide 85...

  • Page 86: North Bridge

    2.25 GB Max TOLUD Maximum Value of TOLUD. 2.5 GB 2.75 GB Enable/Disabel above 4GB Enabled MemoryMappedIO BIOS assignment This Above 4GB MMIO BIOS assignment Disabled[Default] is disabled automatically when Aperture Size is set to 2048MB. 86 OFP-21W33 Quick Reference Guide...

  • Page 87: South Bridge

    Quick Reference Guide 3.6.3.2 South Bridge Item Option Description Quiet Serial IRQ Mode Configure Serial IRQ Mode. Continuous[Default] Windows[Default] OS Selection Android Select the target OS. Intel Linux 3.6.3.3 Uncore Configuration OFP-21W33 Quick Reference Guide 87...
  • Page 88 BR Button Brightness Control Method 2.Brightness Button 3.Variable Resistor 4.OS Driver. OS Driver LVDS Back Light PWM Select LVDS back light PWM duty. 100%[Default] 200[Default] LVDS Back Light PWM Select LVDS back light PWM Frequency. Frequency 88 OFP-21W33 Quick Reference Guide...

  • Page 89: South Cluster Configuration

    Quick Reference Guide 3.6.3.4 South Cluster Configuration 3.6.3.4.1 HD-Audio Configuration Item Option Description Disable HD-Audio Support Enable/Disable HD-Audio Support. Enable[Default], OFP-21W33 Quick Reference Guide 89...

  • Page 90: Pci Express Configuration

    OFP-21W33 11db 14db[Default] AMP Gain Setting Select AMP Gain db. 19db 25db 3.6.3.4.2 PCI Express Configuration Item Option Description PCIe slot PCIe port5-Slot or M.2 select PCIe port5 mapping to PCIe slot or M.2. M.2[Default], 90 OFP-21W33 Quick Reference Guide...

  • Page 91: Pci Express Root Port 3(I210/211)

    Disable[Default] PCI Express Active State Power ASPM Management settings. L0sL1 Auto Disabled[Default] L1.1 L1 Substates PCI Express L1 Substates settings. L1.2 L1.1 & L1.2 Auto[Default] PCIe Speed Gen 1 Configure PCIe Speed. Gen 2 OFP-21W33 Quick Reference Guide 91...

  • Page 92: Pci Express Root Port 4(I210/211)

    Disable[Default] PCI Express Active State Power ASPM Management settings. L0sL1 Auto Disabled[Default] L1.1 L1 Substates PCI Express L1 Substates settings. L1.2 L1.1 & L1.2 Auto[Default] PCIe Speed Gen 1 Configure PCIe Speed. Gen 2 92 OFP-21W33 Quick Reference Guide...

  • Page 93: Pci Express Root Port 5(M.2/Pcie Slot)

    Disable PCIe root port. Disable[Default] PCI Express Active State Power ASPM Management settings. L0sL1 Auto Disabled[Default] L1.1 L1 Substates PCI Express L1 Substates settings. L1.2 L1.1 & L1.2 Auto[Default] PCIe Speed Gen 1 Configure PCIe Speed. Gen 2 OFP-21W33 Quick Reference Guide 93...

  • Page 94: Pci Express Root Port 6(Mpcie)

    Disable[Default] PCI Express Active State Power ASPM Management settings. L0sL1 Auto Disabled[Default] L1.1 L1 Substates PCI Express L1 Substates settings. L1.2 L1.1 & L1.2 Auto[Default] PCIe Speed Gen 1 Configure PCIe Speed. Gen 2 94 OFP-21W33 Quick Reference Guide...

  • Page 95: Sata Drives

    Identify the SATA port is connected to Solid SATA Device Type Solid State Drive State Driver or Hard Disk Drive. Disabled[Default] Enable/Disable SATA Port 0/1 DevSlp. Board SATA Port 0/1 DevSlp Enabled rework for LP needed before enable. OFP-21W33 Quick Reference Guide 95...

  • Page 96: Scc Configuration

    OFP-21W33 3.6.3.4.4 SCC Configuration Item Option Description Disable SCC eMMC Support (D28:F0) Enable/Disable SCC eMMC Support. Enable[Default], HS400[Default], eMMC Max Speed HS200 Select the eMMC max Speed allowed. DDR50 3.6.3.4.5 USB Configuration 96 OFP-21W33 Quick Reference Guide...

  • Page 97: Security

    Quick Reference Guide Item Option Description Enable, XHCI Pre-Boot Driver Enable/Disable XHCI Pre-Boot Driver support. Disable[Default] 3.6.4 Security  Setup Administrator Password Set setup Administrator Password  User Password Set User Password OFP-21W33 Quick Reference Guide 97...

  • Page 98: Secure Boot

    Secure Boot Mode –Custom_Standard, Set UEFI Secure Boot Mode to STANDARD mode or CUSTOM Standard Secure Boot Customization mode or CUSTOM mode, this change is effect after Custom[Default] save. And after reset, the mode will return to STANDARD mode. 98 OFP-21W33 Quick Reference Guide...

  • Page 99: Boot

    1~ 65535 activation key. 65535(0xFFFF) means indefinite waiting. On[Default] Bootup NumLock State Select the Keyboard NumLock state Disabled[Default] Quiet Boot Enables or disables Quiet Boot option Enabled Boot Option #1 Set the system boot order. OFP-21W33 Quick Reference Guide 99...

  • Page 100: Save And Exit

    This option restores all BIOS settings to the factory default. This option is useful if the controller exhibits unpredictable behavior due to an incorrect or inappropriate BIOS setting. 3.6.6.4 Launch EFI Shell from filesystem device Attempts to Launch EFI Shell application (Shellx64.efi) from one of the available filesystem devices. 100 OFP-21W33 Quick Reference Guide...

  • Page 101: Drivers Installation

    Quick Reference Guide 4. Drivers Installation Note: Installation procedures and screen shots in this section are for your reference and may not be exactly the same as shown on your screen. OFP-21W33 Quick Reference Guide 101...

  • Page 102: Install Chipset Driver

    Windows 10 operation system. If the warning message appears while the installation process, click Continue to go on. Step 3. Click Install. Step 4. Click Finish to complete setup. Step1. Click Next. Step 2. Click Accept. 102 OFP-21W33 Quick Reference Guide...

  • Page 103: Install Vga Driver

    Continue to go on. Step 3. Click Next. Step 1. Click Next to continue installation. Step 4. Click Next. Step 5. Click Finish to complete setup. Step 2. Click Yes to accept license agreement. OFP-21W33 Quick Reference Guide 103...

  • Page 104: Install Serial Io Driver

    Continue to go on. Step 3. Click Next. Step 4. Click Next. Step 1. Click Next to continue setup. Step 5. Click Finish to complete the Step 2. Click Next. setup. 104 OFP-21W33 Quick Reference Guide...

  • Page 105: Install Txe Driver

    If the warning message appears while the installation process, click Continue to go on. Step 3. Click Next. Step 4. Click Finish to complete the Step 1. Click Next to continue setup. setup. Step 2. Click Next. OFP-21W33 Quick Reference Guide 105...

  • Page 106: Install Audio Driver (For Realtek Alc662 Hd Audio)

    Windows 10 operation system. If the warning message appears while the installation process, click Continue to go on. Step1. Click Next to Install. Step 2. Select Finish to complete Installation. 106 OFP-21W33 Quick Reference Guide...

  • Page 107: Install Lan Driver (For Intel I211At)

    If the warning message appears while the installation process, click Continue to go on. Step 3. Click Next. Step 4. Click Next. Step 1. Click Install Drivers and Software. Step 5. Click Yes. Step 2. Click Next. OFP-21W33 Quick Reference Guide 107...
  • Page 108 OFP-21W33 Step 6. Click Install. Step 7. Click Finish to complete setup. 108 OFP-21W33 Quick Reference Guide...

  • Page 109: Development Resource

    Quick Reference Guide 5. Development Resource Here you can find development resource for OFP-21W33 Datasheet LCD Datasheet(LVDS) Touch Screen Datasheet Adapter Datasheet CE/FCC test Report (Product Design Verification Report) Here you can find information for Software development How to flash Android image file...

Table of Contents