Security Configuration - Avalue Technology SPC-1533-B1 Quick Reference Manual

Item
Legacy USB Support
XHCI Hand-off
USB Mass Storage Driver Support
USB transfer time-out
Device reset time-out
Device power-up delay

3.6.2.12 Security Configuration

Item
TXE HMRFPO
TXE EOP Message
Options
Enabled[Default]
Disabled
Auto
Enabled[Default]
Disabled
Disabled
Enabled[Default]
1 sec
5 sec
10 sec
20 sec[Default]
10 sec
20 sec[Default]
30 sec
40 sec
Auto[Default]
Manual
Options
Enabled,
TXE HMRFPO.
Disabled[Default]
Enabled[Default],
Send EOP Message Before Enter OS.
Disabled
SPC-1533-B1 Quick Reference Guide 53
Quick Reference Guide
Description
Enables Legacy USB support. AUTO option
disables legacy support if no USB devices are
connected. DISABLE option will keep USB
devices available only for EFI applications.
This is a workaround for OSew without XHCI
hand-off support. The XHCI ownership change
should be claimed by XHCI driver.
Enable/Disable USB Mass Storage Driver
Support.
The time-out value for Control, Bulk, and Interrupt
transfers.
USB mass storage device Start Unit command
time-out.
Maximum time the device will take before it
properly reports itself to the Host Controller. 'Auto'
uses default value: for a Root port it is 100ms, for
a Hub port the delay is taken form Hub descriptor.
Description