ETC ColorSource PAR Installation Manual page 10

ETC Installation Guide
ColorSource PAR v1.7
Adjust the Intensity of Presets
1. Ensure that DMX data is not present.
2. Press the Mode button to access the Presets/Sequences menu, and
then press the Up button or Down button to select the preset that you
want to edit.
3. Press and hold the Mode button for 3 seconds. The display shows
followed by either an intensity level from
4. Press the Up button or Down button to change the intensity level of
the preset in real time.
5. Press the Mode button to confirm your selection and return to
the Presets/Sequences menu.
The display will automatically return to the Presets/Sequences menu after
10 seconds of inactivity, and edits to the preset intensity will not be saved.
Lock the User Interface
After you have set up the fixture, you can lock the user interface to prevent
additional changes.
1. Press and hold the Up button and Down button simultaneously for
3 seconds. The display will show
is locked.
2. To unlock the user interface, press and hold the Up button and Down
button simultaneously for 3 seconds.
ColorSource PAR
0– 99
Loc
to indicate that the user interface
Page 10 of 12
FL
or for full.
L:
ETC