Operation manual
Ultrasonic Flaw Detector NOVOTEST UD3701
Figure 1.18 – Selection window for measured parameters to be displayed
For making measurements user has to stack control gate (A or B) with the tested signal. For
determination differences between values (Ta-b, Aa-b, Ya-b и La – Lb) control gates (A and B) should
be placed on two neighboring reflected signals.
1.7.2 «SETTINGS» mode
The mode is used for flaw detector setting (Figure 1.19), follow settings are available:
1. Screen:
Brightness;
Bright;
Aero;
Degree of transparency;
Antialiasing;
Palette;
Fly;
Grid;
Filling;
Fat line;
LEDs;
Language.
2. Sound:
Sound alarm;
Volume.
3. Date, time:
Date;
Time;
Clock 12-24.
4. Power:
Auto power;
Charger;
Retro.
5. Service:
Auto ZOOM;
Auto close menu;
Auto close keyboard.
6. Reset:
Factory RESET;
Clear SD.
Page 23