Basic Settings Of Flaw Detector - NOVOTEST UD1 Operating Manual

Picture 6.5.3 "PROBES ARCHIVE" mode
Device offers the following steps:
Actions Description
Download Downloading all the settings for measurements
with previously saved settings
Delete Allows to delete the selected file.
Exit Back to list of all files

7 . Basic settings of flaw detector

7.1. Initial setup of the device
7.1.1. Selection of A-scan mode
To select the display mode of the signal as A-scan in the menu
"TRACT" select the "DETECTOR " and set one of available options:
"MODULE" or "RADIO". Typically, the main mode of A-scan is the
"MODULE".
7.1.2. Selection of basic units
The main flaw detectors units can be µs or mm.
Ultrasonic Flaw Detector NOVOTEST UD-1
Development and manufacturing of non-
destructive testing units and system
21