Advertisement

Quick Links

PINHOLE DETECTOR
NOVOTEST ED-3D
MANUAL
2013

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ED-3D and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for NOVOTEST ED-3D

  • Page 1 PINHOLE DETECTOR NOVOTEST ED-3D MANUAL 2013...
  • Page 2: Table Of Contents

    3. Technical characteristics of the device 4. Packing list 5. Device, action principle, bodies of indication and control 6. Marking, container and packing 7. Preparation for work 8. Control process 9. Precautionary measures 10. Storages and transportations 11. Maintenance 12. Warranty Pinhole Detector NOVOTEST ED-3D...
  • Page 3: Introduction

    This manual contains important information about safety, use and service of the pinhole detector. The manual is intended for acquaintance with the device, a principle of action and service regulations of the pinhole detector NOVOTEST ED-3D. Attentively read this manual before using the device. 2. Appointment 2.1.
  • Page 4: Packing List

    3.10. Weight of the device, with batteries – 200 grams. 3.11. Dimensions: -the electronic unit – 70х140х28 mm; -electrode holder – 25х400mm. 4. Packing list 4.1. The electronic unit – 1 piece. 4.2. The electrode holder – 1 piece. 4.3. Set of connecting cables: Pinhole Detector NOVOTEST ED-3D...
  • Page 5: Device, Action Principle, Bodies Of Indication And Control

    The active mode (control tension) is displayed by the light- emitting diode. Indication of the chosen mode (at the left on the right): - a green light-emitting diode – 9V; - a yellow light-emitting diode – 67,5V; - a red light-emitting diode – 90V. Pinhole Detector NOVOTEST ED-3D...
  • Page 6 Design and manufacture of devices and systems for nondestructive testing Figure 1. Bodies of indication and control Pinhole Detector NOVOTEST ED-3D...
  • Page 7: Preparation For Work

    (control tension) will light. The device will keep the last operating mode, before switching off. 7.8. To choose, short pressing of the button an operating mode (control tension) 9V or 67,5V or 90V. Pinhole Detector NOVOTEST ED-3D...
  • Page 8: Control Process

    8.4. When passing the moistened sponge over a place of violation of continuity the indicator of control tension of the chosen mode lights up and the faltering sound signal will be heard. Pinhole Detector NOVOTEST ED-3D...
  • Page 9: Precautionary Measures

    10.2. Indoors for storage there must not be a dust, acids, alkalis and aggressive gases. 10.3. Device transportation in a case can be made by any kind of transport according to requirements and the rules of transportation operating on these means of transport. Pinhole Detector NOVOTEST ED-3D...
  • Page 10: Maintenance

    12.2. Warranty don't extend in case of violation of seals, service conditions, transportation and device storage, and also in the presence of mechanical damages of the electronic unit and/or an electrode holder. 12.3. The guarantee doesn't extend on cables and batteries. Pinhole Detector NOVOTEST ED-3D...
  • Page 11 MANUAL 013.001.0812 Pinhole detector: NOVOTEST ED Тype: NOVOTEST -3D Serial number: ______________________ «____»____________20___. Manufacturing date: Manufacturer: Scientific and Technical Centre "Industrial devices and technologies", Ltd Address 5, Spasskaya str., Novomoskovsk, Dnipropetrovsk reg., Ukraine, 51200 Pinhole Detector NOVOTEST ED-3D...
  • Page 12 Design and manufacture of devices and systems for nondestructive testing Special marks ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ Pinhole Detector NOVOTEST ED-3D...

Table of Contents