Other Cases Not Covered By The Warranty; Guarantees And Consumer Legislation; Maintenance Of The Device - NOVOTEST UD3701 Operation Manual

 User does not provide maintenance of the device within the specified time in accordance
with NOVOTEST recommendations;
 Violation of the operating conditions of the device, recommended by NOVOTEST;
 Changes in the design of the device or its components, interference with the operation of
the instrument systems, etc., without agreement with the manufacturer;
 Usage of batteries and other components of improper quality;
 Voltage drop in mains;
 When refuse to repair in time any damage identified during routine maintenance;
 Factors beyond NOVOTEST responsibility, for example: air pollution, hurricanes, chipped
piece of damage, scratches and use of unsuitable cleaners;
 Application of repair technologies not approved by NOVOTEST;
 Usage of non-original NOVOTEST spare parts and fluids.
Repair operations covered by the NOVOTEST warranty must be made only by an authorized
NOVOTEST service center.

3.3.7 Other cases not covered by the warranty

The basic NOVOTEST warranty, extended NOVOTEST warranty excludes NOVOTEST
responsibility for any unforeseen or consequential damage happened in the result of defect covered by
the above warranties. Such damages are (but are not limited to a list below):
 compensation for inconvenience, phone calls, storage and shipment of the device, loss of
profits or material damage;
 all warranties become invalid if the device is officially recognized as not subject to repair.

3.3.8 Guarantees and consumer legislation

The basic NOVOTEST warranty, the extended NOVOTEST guarantee do not infringe the user's
legal rights granted by the sales contract, which is drafted for purchasing of the device from the
manufacturer or an authorized NOVOTEST dealer; as well as applicable local legislation that defines
the rules for the sale and servicing of consumer goods.

3.4 Maintenance of the device

This maintenance information is valid for all NOVOTEST products.
Maintenance of the device is performed during the entire service life and is divided into:
 preventive;
 planned.
Preventive maintenance is carried out at least once per three months and includes external
inspection, clearing and greasing.
Planned maintenance is carried out by the manufacturer at least once a year and is a mandatory
requirement for maintaining the guarantee from the manufacturer.
It is very important to carry out its maintenance in a timely manner throughout the life of the
device. At the same time, it is necessary to follow the schedule presented in tab. 3.4 (focusing on the
development of the device or the months of its operation, whichever comes first).
The specific list of operations performed during each maintenance depends on the model of the
device, as well as on the year of its production and the amount of operating time. An authorized
NOVOTEST service center will provide the user with information on the work to be performed when
servicing the device.
Records on the routine maintenance of the device are made in the passport for the device.
Information about maintenance is very important, it is necessary to implement your rights to warranty
repair of the device. Therefore, always check that at the end of the maintenance period your authorized
NOVOTEST service center has stamped passport (other document is available) in the appropriate
place under the record of the procedures performed.
Ultrasonic Flaw Detector NOVOTEST UD3701
Operation manual
Page 72