Standard Delivery Set; Parts - NOVOTEST UD3701 Operation Manual

Operation manual
Ultrasonic Flaw Detector NOVOTEST UD3701

1.3 Standard delivery set

 Electronic unit ......................................................................................................................... 1 pc.
 UT probes:
 Straight beam probe ........................................................................................................ 1 pc.
 Angle beam probe ........................................................................................................... 1 pc.
*Type and quantity of probes could be changed or added according to the customer order.
 Charger .................................................................................................................................... 1 pc.
 Cable for PC ............................................................................................................................ 1 pc.
 Case ......................................................................................................................................... 1 pc.
 Operation manual .................................................................................................................... 1 pc.
* At the request of the customer, the delivery set can be expanded with additional equipment or
parts. The exact information about the delivery set is indicated in the passport of the device.
In Figure 1.1 UT probes of different kinds are illustrated:

1.4 Parts

The device consists of an electronic unit and connected probes. User can control the device by
keypad or touch screen display. Signals, measurement results, device modes and other information is
indicated on color touch screen display.
UT probes are connected to the device through coaxial cables. Detachable connections (ports) are
located on the upper end panel of the housing. The device is power supplied by internal recharging
battery or charger. Charger is connected via USB port on the right side of the device housing and is
included to the standard delivery set. Also, USB port is used for PC connection. Parts of the flaw
detector are shown in Figure 1.2., and control keys are described in the Table 1.3.
Page 9
Figure 1.1 – UT probes