Device Modes; Flaw Detector" Mode - NOVOTEST UD3701 Operation Manual

1.7 Device modes

The device has following modes:
1. «FLAW DETECTOR»;
2. «ARCHIVE»;
3. «RESULTS»;
4. «THICKNESS GAUGE»;
5. «GUIDE»;
6. «SETTINGS»;
7. «INFORMATION».
1.7.1 «FLAW DETECTOR» mode
To enter «FLAW DETECTOR» mode, user has, after power-on the device (p. 2.3.2), to select
«FLAW DETECTOR» in the main menu by selection keys « », « », «
by pressing « » or use touch screen (Figure. 1.9).
In «FLAW DETECTOR» mode user can make testing or set the device parameters according to
the task. All measurement parameters of the device are divided into groups (Table 1.4). So, user has
access to different parameters in accordance with chosen group.
Table 1.4 – Setting groups and its parameters
Groups
Basic GAIN
Track GAIN
Gates GAIN
Probe DUAL
Func VIEW
DAC GAIN
DGS GAIN
DTC START
TVG GAIN
Figure 1.8 – «FLAW DETECTOR» mode
VEL SCALE RANGE
RANGE DELAY
GATE START WIDTH
DELAY ANGLE X.VAL
AVG REF. H Method
DAC POINT
DGS A LEVEL
WIDTH GATE
RANGE DELAY
Ultrasonic Flaw Detector NOVOTEST UD3701
Parameters
DELAY
DET ENERGY
LEVEL
FREQ
Calc
POS dB A LEVEL
REF FLAW CONTR
MEAS MODE CONTR
TVG CLEAR
Operation manual
», « » and confirm
F.FILT FILTER ENVEL
F.FILT FILTER
BIND CAP
FORM D / SIZE A / SIZE B
SEARCH CLEAR
AVTO
SEARCH ALARM
POINT POS.
Page 14
REJ
+dВ