Ip Settings - Mio Modero Dms - AMX DMS Operation/Reference Manual

IP Settings - Mio Modero DMS

The configuration of the Mio Modero DMS and Mio Modero DMS Pinnacle requires you set the
communication protocol. Your options are either Static or DHCP. From the Setup page, follow these
steps:
1. Push the button that corresponds to Protected Setup. If you do not have a password established, the
device will not prompt you for one.
2. Select the button for IP Settings.
FIG. 17 Protected Setup Page (Mio Modero DMS)
3. Select the button for DHCP.
FIG. 18 IP Settings Pages (Mio Modero DMS)
4. In the DHCP page, select the button for DHCP to toggle the protocol between DHCP and Static.
Mio Modero DMS & Mio Modero DMS Pinnacle
The default password is 1988.
See the Set Protected Password section on page 33 for more information.
Device Setup
21