SAV 245.09 /.10 /.99
10. EC DECLARATION OF CONFORMITY
complies with the relevant fundamental health and safety requirements from the listed EC Directives based on its
concept and design and in the version put on the market by us.
The device is intended for installation in a machine in the version delivered by us (as an exchangeable equipment).
Commissioning is not possible until is has been established that the machine into which the device is to be installed
complies with the provisions of the EC Directives listed above.
Any changes to the device which have not been approved by us will cause this declaration to become null and void.
The complete technical documentation is available. The operating instructions associated with the machine are available.
24/09/2020
Date
10 EC DECLARATION OF CONFORMITY
Declaration as per EC Directives
Machinery Directive 2006/42/EC
We hereby declare that the design of the
Precision sine table with electro permanent magnetic chuck/electromagnetic chuck
SAV 245.09 / .10 / .99
The following standards have been applied:
DIN EN 60204-1 Safety of machinery - Electrical equipment of machines –
■
Part 1: General requirements
VDE 0580,Electromagnetic devices and components – General specifications
■
DIN EN ISO 12100 Safety of machinery
■
Martin Schacherl
Managing Director
SAV GmbH
Gundelfinger Straße 8
90451 Nürnberg
Germany
[
]
70
Version 1.0