Introduction; Manufacturer's Information - Sav 245.09 Operating Instructions Manual

SAV 245.09 /.10 /.99

1. INTRODUCTION

These instructions are intended for manufacturers, installers, owners and for the operating and maintenance person-
nel of systems in which the precision sine tables with electro permanent magnetic chuck/electromagnetic chuck are
used. The instructions are part of the scope of delivery of the precision sine tables with electro permanent magnetic
chuck/electromagnetic chuck.
These operating instructions contain information on areas such as the technical specifications, safety, correct and
proper use as well as operation and maintenance with reference to the precision sine tables with permanent mag-
netic chucks.
However, they also contain some information about potential risks in combination with the higher level machine.
The objective is to enable the person/company assembling and operating the overall machine to
identify possible risks from operation of the overall machine which arise from the use of the precision
sine tables.
1.1

Manufacturer's information

SAV GmbH
Gundelfinger Straße 8
90451 Nürnberg
Germany
Phone: +49 911 94 83 0
Fax: +49 911 480 14 26
Email: info@sav.de
Web: www.sav.de
1 INTRODUCTION
NOTE!
Store the operating instructions freely accessible, ready to hand at the place
of use of the precision sine tables. The operating instructions must be read,
understood and applied by each person tasked with the following work on
the precision sine tables:
Transport and storage
■
Assembly and commissioning
■
Operation
■
Maintenance and repairs
■
Decommissioning and disposal
■
NOTE!
These instructions become part of the set of documents which also contains
the documents for the higher level system parts and machines and applies in
combination with these.
[ ]
38
Version 1.0